36116750254 steelie
							
						
					E30 M3 Steel Bodywork Conversion
				
					Collapse
				
			
		
	X
- 
	
	
	
	
		
	
	
	
		
	
		
			
				
	
	
	
	
	
	
	
	
	
 Thanks man,
 
 My shop is in Hummelstown, which borders Hershey on the West... 20 miles from Carlisle. LMK when you're coming up... stop in for sure!
 
 Garey 
 
  Comment
- 
	
	
	
	
		
	
	
	
		
	
		
			
				
	
	
	
	
	
	
	
	
	
 So e30tech member Eudaemonic was making a trip to Pennsylvania from Boston and happened to have a set of wheels I'd been bugging him about for months. He PM'ed me a week or so ago about the wheels and said he was ready to part with them and wanted to know if I was still interested in them... I said yes and he then asked if he could stop by the shop to see the project and drop the wheels off to me en route to State College. I said of course, so around 2PM today, Fred stopped by the shop and we bullshitted for an hour or so. It was great to hang out and talk, but he had to get up North, so he left around 3:15. He did say he wanted to see some pics of the wheels on the car, so before I left, I quick put 2 on the driver's side and snapped some pics...
 
  
 
  
 
  
 
 The pictures suck... I'll try to get some better ones on Sunday, but at least you can get the idea. Style 42's, E36 fitment, staggered... They may get the centers powdercoated to match the Alpine exterior or they may stay silver... don't know yet. Tire sizes are a little off for the car, but they're closer than the mud-boggers I had on it before, Lol! We'll see what I ultimately end up with for tire sizes, might take some trial and error...
 
 Thanks again Fred and it was a pleasure meeting you! Stop by anytime...
 
 GareyLast edited by bmwmech1; 07-23-2011, 07:07 PM. 
 
  Comment
- 
	
	
	
	
		
	
	
	
		
	
		
			
				
	
	
	
	
	
	
	
	
	
 Car is looking great Garey! I like those wheels on it.
 
 When do you think it'll go for paint?- Josh
 1990 325is
 
 Need a shift boot?
 Looking to buy shift boot frames, PM if you have one to sell
 
 Here's what happens when you let the internet pick your license plateComment
- 
	
	
	
	
		
	
	
	
		
	
		
			
				
	
	
	
	
	
	
	
	
	
 Well, my primer came in on Wednesday, but the heat and humidity are too high here to even think about primer or paint right now. I would like to get the primer on it sometime in the next 2 weeks, dependent on the weather, of course. I have to prime the inside and outside, so I have plenty to do and obviously the inside is not as crucial finish-wise, so it will require less attention than the outside. I still have to scuff the interior before I can prime it and that will take a day or so, itself. Once it's primed, I'll order the base and clear and yes, it looks like I'll be shooting it myself. I'll be happy when the paint is done and I can start putting pieces on it for good...:D
 
 Garey 
 
  Comment
- 
	
	
	
	
		
	
	
	
		
	
		
			
				
	
	
	
	
	
	
	
	
	
 Worked on the exhaust a little tonight. I want to get the exhaust mock up done before I go forward with the primer. Made a little progress...
 
  
 
  
 
 The cats sit in pretty much the stock location and the mufflers sit where the gas tank used to. I need to pick up some hangers, flanges or V-band clamps and then fill in the missing sections...
 
 Here's a good shot of the underneath from the back...
 
  
 
 GareyLast edited by bmwmech1; 07-26-2011, 08:20 PM. 
 
  Comment
- 
	
	
	
	
		
	
	
	
		
	
		
			
				
	
	
	
	
	
	
	
	
	
 Im going to have to stop looking at this thread, giving me an inferiority complex lol.
 
 Good work as always Garey.Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.
 
 
 Originally posted by der affefirst try a finger or 2, you need to have them suck on it first and get it nice and wet to help it slip in.
 
 if she goes for that, astroglide up your pole, have her lay on her stomach and slip it in slowly and bury it to your balls and leave it there until she relaxes. once she is used to it slam that ass like a screen door.Comment
- 
	
	
	
	
		
	
	
	
		
	
		
			
				
	
	
	
	
	
	
	
	
	
 Definitely a great looking set of wheels, I'm just not sure if they're baller enough for your car. Seriously.Comment
- 
	
	
	
	
		
	
	
	
		
	
		
			
				
	
	
	
	
	
	
	
	
	
 Thanks man... that's what Mike(White325is) said, too. I just don't know if I want a baller set of wheels, though. These are pretty functional as far as size and looks, they're not flashy, good driving wheels. Maybe a set of iforged, CCW's, etc would be killer looking, but I'd be afraid to drive it much with them on. I plan on driving this thing when it's done, so maybe a second set of wheels for shows, that are flashier... dunno.
 
 Garey 
 
  Comment
- 
	
	
	
	
		
	
	
	
		
	
		
			
				
	
	
	
	
	
	
	
	
	
 I like the idea of a second set of wheels. The one for shows. The show ones should have some stretch and poke. Haha.Comment




Comment