Kamotors E30-Turbo to ITB M20

[kamotors]

hey buddy,

i was wondering if you could post some pictures up of your car that showcase the rallyarmour mudflaps? there's only one decent one that i can find. anything you can share would be highlyyyy appreciated. thanks!

I dont have any good pics I'll take some more once the car runs again.

I started a Kamotors Performance Parts facebook page, I check it daily and give updates on parts. I will be open to suggestions to improvements or future parts you want built.

Click to view it http://www.facebook.com/pages/Kamoto...40420622725455

[kamotors]

Got the turbo and oil feed done and installed. mocking up the charge pipes.

On a side note the Miller WAR chip is giving me trouble, I've only got he program to open once, other times it just isn't recognized or has errors. I was also disappointed to find out that there isn't a turbo base tune available to download and the WAR room no longer exists. I asked before purchasing if there was a base tune to run the car and was told yes.

[DREWHALL]

Looking great!

[acolella76]

Sadly you aren't the first person to have complaints about Miller. I have heard a lot about their customer service, none of it good.

Keep up the good work!!

[kamotors]

Miller still hast got back to me. I think I may sell the war chip and go another route since all 3 computers I've tried it on have some issues opening it. I was told I could use windows XP virtual PC to open it but thats not working it attempts to open it but instantly closes. I got it to open on windows vista but I then discovered it didn't have a turbo base file and closed it and safely ejected it, and now it wont open on the same computer.

[kamotors]

Mounted my Turbosmart 38mm Ultragate wastegate today with the 5psi spring. Also relocated my spark plug wires further away. I then finalized my coil position by drilling a hole and mounting it down. Ordering charge pipes and downpipe material today.

[kamotors]

So far the turbo build has cost $1231 which isn't too bad.

[acolella76]

I just extended the coil wires and mounted the coil right behind the headlights.. Looks pretty clean IMO. Good work on the build, looks like it's coming along!

[e30trooper]

what are you doing for the oil drain?

[kamotors]

what are you doing for the oil drain?

oil pan or dipstick. I have enough -10 an line to do the dipstick so I'll try that first.

[kamotors]

got the war chip setup, have my rev limit set at 6250 since the only time I can hit it is during wheel spin. Car started on the turbo tune first try.

[theox69]

got the war chip setup, have my rev limit set at 6250 since the only time I can hit it is during wheel spin. Car started on the turbo tune first try.

And you didn't post a first start video!? Don't you know better than to keep us in the dark?

[kamotors]

And you didn't post a first start video!? Don't you know better than to keep us in the dark?

I don't have an oil drain so the car was only on for 5 seconds:)

[kamotors]

orderd 30lb injectors today. My boost goals are about 6-7psi.

[theox69]

orderd 30lb injectors today. My boost goals are about 6-7psi.

What kind of power are you looking to make?
My best guess would be 230-250whp.