Also going to start some weight reduction now. Going to make custom bumper beams to get rid of the current heavy fiberglass cores
Kamotors E30-Turbo to ITB M20
Collapse
X
-
I think I found my new quote for my signature :) damn right!
Damn man your car is a whole new beast now!! hows does 20PSI feel compared to your old 10-12 PSI WAR MAF setup.... How much timing can you rock at 20PSI? and whats your AFR right now?Denny
___________
1990 BMW red 325IC M30B35 all stock Girlfriends ride
1991 BMW black 318IC (M62b44 Megasquirt 2 ver 3.57)
Blogs:
http://bmw325e30.blogspot.com/ (restoration)
http://bmw325e30turbo.blogspot.com (Twincharge M20)
http://bmw325e30m62b44.blogspot.ca/Comment
-
20psi feels amazing, its a real rush to drive and will get yoy in trouble very quickly. Running around 22degrees of timing and 11.8 AFR. I want to try a few more degrees of timing but I feel I need 93 octane for that
7speedshop.comComment
-
WAR chip feels like poo compared to megasquirt. When I had WAR it was always things like that sensors bad or its my draw through setup and lame excuses for why my car wouldn't run with stock like drive ability. For a moment I almost believed that it wasn't possible to drive like stock with a turbo. But then day I slapped on megasquirt...... even un-tuned the car ran perfect. Same sensors and everything worked with NO CEL so I could technically pass smog with a cat.
20psi feels amazing, its a real rush to drive and will get yoy in trouble very quickly. Running around 22degrees of timing and 11.8 AFR. I want to try a few more degrees of timing but I feel I need 93 octane for that
When you can show me your fuel map.. and also how did you configure your injectors in MS...am moving from 30# to 60#?Denny
___________
1990 BMW red 325IC M30B35 all stock Girlfriends ride
1991 BMW black 318IC (M62b44 Megasquirt 2 ver 3.57)
Blogs:
http://bmw325e30.blogspot.com/ (restoration)
http://bmw325e30turbo.blogspot.com (Twincharge M20)
http://bmw325e30m62b44.blogspot.ca/Comment
-
Considering fender flares, like zg style so I can go wider right now I'm noticing a lot of rubber dust building up on my rolled flat flares from rubbing every now and then. I actually took a good mm out of one of my rear tire because it caught the fender lip while sliding a turn, it ended the drift pretty quickly..... I can not even fit a finger in my front fender gap. Before I rolled it on the new wheels the car wouldnt even move and a note card could be held by my fender gap.
thinking like this.
7speedshop.comComment
-
Considering fender flares, like zg style so I can go wider right now I'm noticing a lot of rubber dust building up on my rolled flat flares from rubbing every now and then. I actually took a good mm out of one of my rear tire because it caught the fender lip while sliding a turn, it ended the drift pretty quickly..... I can not even fit a finger in my front fender gap. Before I rolled it on the new wheels the car wouldnt even move and a note card could be held by my fender gap.
thinking like this.
Very cool! let me know how much they cost $$$ I may be interested too. I'm going to need 245's in the back minimum:twisted:Denny
___________
1990 BMW red 325IC M30B35 all stock Girlfriends ride
1991 BMW black 318IC (M62b44 Megasquirt 2 ver 3.57)
Blogs:
http://bmw325e30.blogspot.com/ (restoration)
http://bmw325e30turbo.blogspot.com (Twincharge M20)
http://bmw325e30m62b44.blogspot.ca/Comment
-
They are usually less than $200, problem I'm having is that most are only 2" flares and I would need about 3" to have room for something like superwide 245's or 265's
7speedshop.comComment
-
What fuel pump are you using? Had to cut my dyno tune short at 14psi because anything more the fuel pump couldn't keep up
Sent from my Galaxy Nexus using Tapatalk 2Comment
-
my flares are very rolled and still rub:( the front are rolled 100% flat and pulled 2-3mm and I still get rub, my tires are bulging off of an 8" rim
7speedshop.comComment
-
Guess my fp is just not up to the task.
Sent from my Galaxy Nexus using Tapatalk 2Comment
-
Watching very closely :) I'm going to need these...
What size tires are you going to use?
for my rears 16x9 I wanted to go 245/45/16 but its ridiculous expensive and 245/50/16 are just to BIG overall..Denny
___________
1990 BMW red 325IC M30B35 all stock Girlfriends ride
1991 BMW black 318IC (M62b44 Megasquirt 2 ver 3.57)
Blogs:
http://bmw325e30.blogspot.com/ (restoration)
http://bmw325e30turbo.blogspot.com (Twincharge M20)
http://bmw325e30m62b44.blogspot.ca/Comment
-
they are basically the beastly version of my current wheels
Also decided to try out brake boosting yesterday while cruising. its insane, I can build 10psi while rolling at about 40-50mph, I let off the brake my tires screech and i fly away lol, insta boost
also IF the flares turn out good I'm willing to modify other sets to be E30 specific and sell them at a MUCH cheaper price than any other E30 flare out there.
7speedshop.comComment
-
What company?
Sent from my Galaxy Nexus using Tapatalk 2Comment
Comment