14 years - 1991 325ix, Stroker/5-Speed (N52 swap?)
Collapse
X
-
I can neither confirm or deny your allegations.
no real updates. Started taking apart an old transfercase to rebuild it, waiting for a transmission to arrive from Germany and looking for an ix 5-speed trans as a core. also need to get the front and rear diffs down to California to be rebuilt.. get the M20 running on MSS54, finish the cluster swap, man it never ends!
S54iX look out!
Leave a comment:
-
I can neither confirm or deny your allegations.
no real updates. Started taking apart an old transfercase to rebuild it, waiting for a transmission to arrive from Germany and looking for an ix 5-speed trans as a core. also need to get the front and rear diffs down to California to be rebuilt.. get the M20 running on MSS54, finish the cluster swap, man it never ends!Leave a comment:
-
-
the stim's are megasquirt stuff. the harness is my "reverse" wiring adapter for MSS54 to my MS3/M20 harness.
the main hurdle now is getting it to work with just 1 TPS input..Leave a comment:
-

so much learning for us all here - the great suspension work, the stroker... never seen an ix stanced like that, WITH full suspension travel and decent camber.Leave a comment:
-
Probably better that you dont, its not even close to perfect! There are some bad paint spots on the roof, and even a new rust spot under the windshield that is KILLING me to get fixed. And my front seats are horrid, lol... notice there are never interior shots :pLeave a comment:
-
Wished I was a local to you, I want to shoot that car badly. It is perfection and the management is what the m20 should have been.
So many m20 builds on here. IMO this is in the top 5 out there.Leave a comment:


Leave a comment: