Alright guys well its been a fun ride, but i'm done with this e30.
I found out it has a very slightly tweaked frame as its been driving a bit unpredictably in spirited driving + the twisties. So I will be swapping everything into the Delphin Gray 325 that I bought a few months ago.
The plan is -
Strip Delphin Shell
Prep it for paint
Re-paint it Delphin Gray
Swap everything over from the Blue Shell
HOON
Parts Ordered -
225-45-15 Hankook RS3 x 4 - Arrived
TRM C1 15x8 +20 Wheels in black - Arrived
Podi.ca Vent Gauge Setup
Ryan G Splitter - Arrived
Motorsport Hardware Stud + Lugs conversion - Arrived
Rack Doctor Completley rebuilt Steering track w/ new inner + outer tie rods, boots, and seals. Has 2.7 Lock to lock compared to e30 at 3.2 LTL - Arrived
Exhaust Wrap - Arrived
Need to order-
iS Lip and Side Skirts
Rear Late Model Valance
Sanding blocks + Sandpaper
Corner Balance + Alignment
yahh's 1986 325e S50+Recaro+BBS RS
Collapse
X
-
-
I converted to late model bumper and valance... and he went to the 03 front end for the mr2's and his hood had holes in it from the P/O for hood latches.Leave a comment:
-
What are you guys doin drivin into shit and throwing red front ends on ??Leave a comment:
-

Lake Anna Trip by yahh-, on Flickr

Lake Anna Trip by yahh-, on Flickr

Lake Anna Trip by yahh-, on Flickr

Lake Anna Trip by yahh-, on Flickr

Lake Anna Trip by yahh-, on Flickr

Lake Anna Trip by yahh-, on Flickr
BONUS

Lake Anna Trip by yahh-, on Flickr

Lake Anna Trip by yahh-, on Flickr

Lake Anna Trip by yahh-, on Flickr

Lake Anna Trip by yahh-, on Flickr

Lake Anna Trip by yahh-, on Flickr

Lake Anna Trip by yahh-, on Flickr

Lake Anna Trip by yahh-, on Flickr

Lake Anna Trip by yahh-, on Flickr

Lake Anna Trip by yahh-, on Flickr

Lake Anna Trip by yahh-, on FlickrLeave a comment:
-

Turbo Parts by yahh-, on Flickr

Tial Waste Gate by yahh-, on Flickr
Everything I have so far. Justin's old hx40 (friend from eclipses), Tial Wastegate, SoLive 24v Manifold, Hallman MBC, 1G BOV is pictured but i will probably use one of the EVO IX metal ones I have.Leave a comment:
-
-
Oh it's definitely worth it. I came from a boosted car and once you have boost it is very hard to go without. The car is plenty quick for spirited driving but I'm shooting for about 350-400.Leave a comment:
-
So is what your saying is the S50 swap wasnt worth it because you still need more powa?Leave a comment:
-
Couple Parts came in.

24v IE Oil Cooler Adapter by yahh-, on Flickr

24v IE Oil Cooler Adapter by yahh-, on Flickr

Gauge Adapter by yahh-, on Flickr
1/8th npt to m12x1.5 adapter to replace the dummy light.

New Gauges by yahh-, on Flickr
Just waiting on oil pressure as it's backordered from VDO.Leave a comment:


Leave a comment: