S38 turbo e30 Hartge H35-24 H bomb

[e30m3s54turbo]

Here is a better pic. I’m going to add a other thing to cluster soon.

[e30m3s54turbo]

I been bouncing back and forth on my headlights with euro adjustables .and cluster wiring and sensors.
I got my sensors on my $50 oil cap filter. I wired up to see digital read out on my costume cluster.

[e30m3s54turbo]

I bought a few euro kick panels with headlight aim control parts. It looks rough to me. I think I need to buy a new 3D kick panels.

[e30m3s54turbo]

I found a new set of headlight adjusters. I was able to buy brackets.

[e30m3s54turbo]

I started to play with my lights.

[e30m3s54turbo]

I finished the spal fans and relays installed with over ride switches.

[e30m3s54turbo]

I think the S Blade version has a higher cfm. And if it’s a spal, they have fan gaskets to help seal the radiator.

Running AC? What are you going to do for a controller?

Thank you for input.

I didn’t know spal had a gasket. I managed to get fan up to radiator. It pushes three now.

No AC for now.🥵

I received this today.

[moatilliatta]

I think the S Blade version has a higher cfm. And if it’s a spal, they have fan gaskets to help seal the radiator.

Running AC? What are you going to do for a controller?

[e30m3s54turbo]

I had to adjust the pusher fan to be flush on radiator. I noticed when I ran power to it the air was not pushing all the air threw. It had a gap around a 1/4”. It is not bolted on radiator. It bolted on core support that is not perfect.

[e30m3s54turbo]

I like the oval tip!

I agree with you. I just need to figure witch one that will look a a Hartge tip.

I worked on all three of my fans to fit in a tight space. I made some aluminum tabs and drilled them to allow air to flow radiator.

[moatilliatta]

I like the oval tip!

[e30m3s54turbo]

so much cool stuff happening!! Keep at it

Thanks, Sam.

I have more cool things coming soon.
I was having trouble with HID light on passenger. It would flicker on and off. I found it was a bad ground in the wiring. It works now.
I received my two Spal 10” fans today. I will be running three Spal fans.

[2mAn]

so much cool stuff happening!! Keep at it

[e30m3s54turbo]

I ordered a oxygen sensor. I welded the bun on the down pipe.

I was thinking about my Hartge 280km cluster. I did not want to pull speedo out to put in my m3 cluster.



I ordered a custom Hartge 300km m3 cluster with digital
gauges. I the fuel gauge changed to 55 liters. Sorry about the pics not in order.

[e30m3s54turbo]

I’m finished on rear fog lights. I need to replace rear back euro back panels with better ones. I’m having problems with front passenger side headlight. It seems I have a short in wiring. I checked wiring for breaks. No luck. I ordered a electoral short tester.