S38 turbo e30 Hartge H35-24 H bomb

[moatilliatta]

All the goodies. Thought about doing a Milspec engine harness with a higher tier standalone? I’ve had to do a lot of work on a restoring old harness recently. Something to match the build? :)

[e30m3s54turbo]

Here is what I’m adding to pedals.

[e30m3s54turbo]

I like how it came out.

[e30m3s54turbo]

I been cleaning carpet. I decided to darken the carpet.

[e30m3s54turbo]

This is how mine came out lol, such a long process as it was my 1st time using bondo in general. I haven't lived with it yet as im doing an overall project on the car but its just about complete but I believe I like how it came out

You know the process…😅 I’m pleased how it came out on mine. It had 19 cracks. If I find a e30 dash with one or two cracks it will be a piece a cake.

Do you a pic of your dash?

I ben cleaning carpet to paint graphite on it.

[e30m3s54turbo]

This is such a nice build; on another note what is happening to your hartge cars?
thanks,
jm

Hi John.
Thanks…
still have the other projects.
On H23 cam I’m not sure what size they used. I would have to look into it.

[Garrick2007]

I took my dash out to experiment how to repair. I read on how someone on r3v repaired his dash in 2012. These days on the dash’s for a used dash with no cracks cost $600-$1000.
I’m my experience on repairs. I would recommend a dash with one or two cracks.

This is how mine came out lol, such a long process as it was my 1st time using bondo in general. I haven't lived with it yet as im doing an overall project on the car but its just about complete but I believe I like how it came out

[2002jm]

This is such a nice build; on another note what is happening to your hartge cars?
thanks,
jm

[e30m3s54turbo]

I took my dash out to experiment how to repair. I read on how someone on r3v repaired his dash in 2012. These days on the dash’s for a used dash with no cracks cost $600-$1000.
I’m my experience on repairs. I would recommend a dash with one or two cracks.

[e30m3s54turbo]

I finally got my Tail blow off flange and piping welded up. I have a Tail waste gate. I want to order a new one in black. I’m finishing my vacuum lines.

[e30m3s54turbo]

I’m working on MSII to bolt up in glove box. I’m a bracket that will work for me. The e34 m5 wire harness barely makes it in glove box. I had to extend some few wires.

[e30m3s54turbo]

I was not happy with turbo oil drain rubber hose line. The rubber was easy to get damaged and cut. I bought black braided nylon hose. It is little hard to damage it.
I’m ordered a new PPF s38 flange and turbo t4 flange. I will be ordering more piping and Vband turbo flange for a Precision ball bearing turbo 7675. After I get the car running on this turbo.

[e30m3s54turbo]

I’m going to weld aluminum piping. I need to order Tail blow off to figure where to weld flange. I been bolting everything on motor.

[e30m3s54turbo]

I bolted up turbo up with gasket. I didn’t like the gasket. I ordered a stainless steel gasket. I also bought this for my car. I will be adding some euro parts to this project.

[e30m3s54turbo]

I’m having second thoughts on my oil feed from oil housing adapter. I might order a Alpina B10 Biturbo oil filler housing. The Alpina gives me more access to sensors.


I been thinking about buying this cluster with out M tenchnic. I will be having them add Hartge 300klm. I have real Hartge 280 klm.