S38 turbo e30 Hartge H35-24 H bomb

[e30m3s54turbo]

I bolted up turbo manifold and water log. It was a pain in ass to bolt up.

[e30m3s54turbo]

I been researching on coil packs. I need to buy one that I can test to fit.
I’m need bolt up studs and copper nuts.

[e30m3s54turbo]

Programmable ecu with timing maps, vs the 6al box.

I am researching what oil packs that I can plug in. If you or any one else can give me some leads or links.
Im going to use MSII.

[moatilliatta]

Programmable ecu with timing maps, vs the 6al box.

[e30m3s54turbo]

Why no modern fuel injection system?

Are asking about size injectors?

[moatilliatta]

Why no modern fuel injection system?

[e30m3s54turbo]

I’m done on vacuum lines. Just need vacuum line for MSII, waste gate and blow off.

I been working on extending some wiring to push harness inside glove box.

[e30m3s54turbo]

I’m been reading up on vacuum lines and ordering lines and parts to finish that system.

I want to do wasted spark in the near future. I don’t want to use s38 b38 coil packs on this motor. I will be looking for cleaner coil packs.
For know I’m going to use MSD coil and MSD ignition 6A.

[e30m3s54turbo]

I finished my fuel lines.

[e30m3s54turbo]

Funny thing about fittings, you’ll still need more! :)

I agree.

[moatilliatta]

Funny thing about fittings, you’ll still need more! :)

[e30m3s54turbo]

[e30m3s54turbo]

Here some fittings I bought. I always buy a a little more than I need. I don’t like to go back to buy more.

[e30m3s54turbo]

I ordered Nuke fuel rail and adjustable fuel regulator.
I ordered dash #8 fuel lines and fittings.

[e30m3s54turbo]

I started to wire up the old harness s38 to e30. I’m also doing vacuum lines and vent lines. The vent hose from the valve cover is on back order. Making a temporary hose.