We're you running the stock crank pulley and the stock pulley from the Buick M90? Do you know how much boost you were making with those pullies by chance?
Roots charged s52
Collapse
X
-
This is amazing I think about putting an eaton in just about everything. Good luck with the head work, plans to build the head a bit?Comment
-
Your coolant was coming out the cap every time you hit the throttle.First start sorry for the squeaky alternator belt.
This is a road test not the best video but you will get the point.
http://youtu.be/es1EKFPJDYAComment
-
-
-
sub'ed. Thinking of doing this to my m30. That should be fun ;)Originally posted by Matt-Bhey does anyone know anyone who gets upset and makes electronics?Comment
-
It took me a second readthru to realize there was an alternator relocation as well. Any info on how you did that also?Comment
-
Sorry for no update. i recently moved to Tampa and i don't have a good place to work on the car so im at idle for now. but their are some updates
This was my first setup. maf - supercharger - fmic - bov - throttle body. it work but not for a daily. Because the supercharger is a positive displacement so while cruising with the throttle body cracked the air had nowhere to go so it constantly was blowing off. Annoying and not very inefficient. Here is a pic of the first setup

new setup throttle body before the supercharger and no fmic


if you where wondering about my brake booster here is a pic.
Comment
-
At 3, 5 or even 8psi you probably won't need an intercooler. They're beneficial but your intake temps at those levels should still be pretty safe. My old DD was an SVT Focus with an Eaton M62 blower on it. It pushed 10-11psi and I ran it unintercooled for 5 years and 100k miles. On hot days or stuck in traffic the heat soak was noticeable but it was a tradeoff for a very simple setup. Brake booster location makes me lol.91 318is M50 swapped
05 Honda Pilot
24V swap thread
http://www.r3vlimited.com/board/showthread.php?t=302524Comment
-
Comment


Comment