My stock rear end took a crap shortly after i bought it and because its a sedan it was an open diff anyway, so i found and bought a 3.73 limited slip from cali off a user on here. im not to worried about the rear end, it should hold up well but thanks for the suggestion!
-
-
also curious as to how this goes as i have this manifold sitting on my dining room table waiting for some love.'89 Delphin 2.8 Cabrio
'94 Yamaha FZR 600
Originally posted by FlexdXJComment
-
Well waiting for more parts to get here so we decided to do some cleaning, the head came out super awesome, cleaned up real nice then a little cast aluminum paint to top it off,
Then we decided to start cleaning up the engine bay a little, more tomorrow then a little paint and she should be looking good!
PS: I hate waiting for parts lol.Comment
-
Curious how this goes, i plan on changing from my 2.7 from a holset hx35 to a gt3076rComment
-
Comment
-
Brought more parts home from powder coating today, Im going to lay everything out tomorrow and take a few more pics, the parts turned out awesome!
Didn't think we had enough high temp powder left to finish my stuff but we had just barely enough lol.
Then we took a quick trip to Summit Racing (30 mins away) to get the rest of the little stuff i needed, Couplers, vbands, etc etc.
I would like to say how completely awesome Pelican Parts is, I bought every little o-ring, gasket, belt and seal I could think of on the M20 and my total was under $100 and I had a tracking number in less then 3 hours lol. They are an awesome company with fantastic service :)Comment
-
Pelican isnt bad, bought lots from them. prices arent the best I have found, but their site is very easy to use.Brought more parts home from powder coating today, Im going to lay everything out tomorrow and take a few more pics, the parts turned out awesome!
Didn't think we had enough high temp powder left to finish my stuff but we had just barely enough lol.
Then we took a quick trip to Summit Racing (30 mins away) to get the rest of the little stuff i needed, Couplers, vbands, etc etc.
I would like to say how completely awesome Pelican Parts is, I bought every little o-ring, gasket, belt and seal I could think of on the M20 and my total was under $100 and I had a tracking number in less then 3 hours lol. They are an awesome company with fantastic service :)
Guten parts has had the best prices I have found. And Levent is amazing when it comes to customer service. I emailed him a pretty detailed question, and he CALLED me with the answer in 5 MINUTES. I was blown away.
Also, im jealous about your trip to Summit. I have been meaning to go to the one here in Georgia forever.Comment
-
Comment
-
On a side note I also make stickers, I have flat black, flat white, and orange vinyl. If enough people want one Ill start selling them. Love this sticker!
Comment
-
Got all my parts back to the garage from powder coating and laid every thing out in the driveway, turned out real good. All the hot parts are coated in a high temp black powder coat, rated for 1300 degrees but im not super confident in that lol
Also got my oil filter housing tapped and read to go.
Love coming home to this :)
This how i left her yesterday, cant wait for more parts to get here! hopefully tomorrow or saturday. Those packages are my billy rear shocks (the only piece of the suspension still stock) and my Condor engine mounts.Comment
-
Great work so far! I love a fresh batch of powdercoated parts. :)
Are you going to do anything to the head while it's off?
Oh and good call on staying with a stock headgasket. It will be just fine!Comment
-
Thanks! and nope just a quick clean for now but in a month or so im going to pull the trans and do a clutch and at that time i plan to throw a cam in it. but for now its in good shape so im just leaving it. My HG actually just showed up at my door, rather excited about that! now just waiting on the studs which should be here today and ill have a busy weekend getting everything back together!Comment
-
Got my package from pelican today :)
Made a little block off plate for the coolant lines and the tube for the VC breather, turned out nice id say lol
Cut my Magnaflow 14815 off the stock exhaust for use with the new turbo back I am going to be making shortly
and tore the threads out of the O2 getting it out, fail fail fail. time for a new one
Then since the gaskets came in i decided to get the manifold mounted up to the head, it so much easier on the bench then in the car. Everything bolted up nicely!
Still..... waiting on the studs to get here, ugghhComment
-
Looking good.
Might make myself one of those plates. Unless you care to make another one?
Sent from my Galaxy Nexus using Tapatalk 2Comment
-
Comment
Comment