Melted a piston, now LSX Turbo

[lambo]

I like your choice in automobile modifications.

[Dirk HX35]

melted piston #6

decided to sell all my m20 parts and go lsx turbo

already bought a 5.3 lm7, time to collect parts

[whodwho]

...
Last time I drove it, it started missing like crazy.
I haven't messed with it since.
I emailed whodwho but never got a response.
He set it up so I could run wasted spark in the future, but I never got that far.
...

Not sure I got an email but all possible I missed it, sorry if I did 8^(

Please email me again to resolve it or to assist with setting up the WS - w h o d w h o @ c o x . n e t

One thing is to make sure the TunerStudio project is set for Microsquirt Module or it scrambles up the ignition settings and will run like shit or no start

Let me know

[squidmaster]

Damn! At least you have the 5 to daily while it's out.

[Dirk HX35]

Shitty pictures, I apologize.
Sourced a set of hood splitters!


No compression in cylinder 6, so time for stroker build


Trying to buy the mtech 2 set from Sskoda currently, just waiting for a reply.

Put sawblades on the e28 since I got them for free from a friend.

[Dirk HX35]

Sick build! I'm going to run a hx35 as well but I'm currently sourcing parts for my rebuild ;)

Btw, How's the 8lb flywheel working out? I just got a package from uuc but still debating on running a 8lb. My thoughts are it should work fine until a big snail gets dropped in?

Sent from my Nexus 5 using Tapatalk

Thanks!

I loved how quick it rev'd with the 8lb from JB Racing.
I never put much thought into it past "lighter is better", hopefully it doesn't turn into a problem with the HX52.

[spoolinspoon]

YES!

Last time I drove it, it started missing like crazy.
I haven't messed with it since.
I emailed whodwho but never got a response.
He set it up so I could run wasted spark in the future, but I never got that far.

Plan is 16x10 fronts 16x12 rears.

Thanks for your help!

The jumpers on the wdw setup should be set to use the single ignition driver that's installed. I plan on running wasted spark so I'll need to add in the additional drivers.



Sent from my Nexus 5 using Tapatalk

[spoolinspoon]

Sick build! I'm going to run a hx35 as well but I'm currently sourcing parts for my rebuild ;)

Btw, How's the 8lb flywheel working out? I just got a package from uuc but still debating on running a 8lb. My thoughts are it should work fine until a big snail gets dropped in?

Sent from my Nexus 5 using Tapatalk

[TheTacoMan]

Kamotors has experience with wasted spark, he might be able to help.

[squidmaster]

Your ideas are intriguing to me and I wish to subscribe to your newsletter.

I think sharing is overrated too. And helping others. And what's all this crap I've been hearing about tolerance?

[Ray Smoodiver]

Your ideas are intriguing to me and I wish to subscribe to your newsletter.

[squidmaster]

jeebus 16x12 that's nuts!

[Dirk HX35]

You having spark problems? I've read a few threads about people running the wdw ms2, though I think the problem lies within ms2 itself. Are you running wasted spark?

feel free to shoot me a message anytime

in either case it's looking good! how wide are you going?

YES!

Last time I drove it, it started missing like crazy.
I haven't messed with it since.
I emailed whodwho but never got a response.
He set it up so I could run wasted spark in the future, but I never got that far.

Plan is 16x10 fronts 16x12 rears.

Thanks for your help!

[squidmaster]

Believe me, I can't wait to get back in this car.
Might need your help getting the tune ironed out this spring.
Never ran 100% right.

You having spark problems? I've read a few threads about people running the wdw ms2, though I think the problem lies within ms2 itself. Are you running wasted spark?

feel free to shoot me a message anytime

in either case it's looking good! how wide are you going?

[Dirk HX35]

Are you running ms?

Yeah MS2 from whodwho