My euro 320i/B6 3.5 Alpina Tribute ( Now with turbo power)

[ThatOneEuroE30]

$100 for the lower part of a 2 piece euro valance? that's a steal.

It's not that amazing of shape it's just gonna be used as a backing for a alpina valance.

[ThatOneEuroE30]

So I haven't done much but I've done a little.

Got my electric Mishimoto fan put in. Its a 16" rated for 1850 cfm so it should do for now.


Got the antenna delete welded in.


also got 2 of the 3 rust spots patched. The last one spread further then the rest so I'm still making a game plan on how I'm gonna tackle it. This car has been a war on rust haha





I also got my e28 down pipes and everything to do the rear brakes I just need to do them.

[e30m3s54turbo]

If you plan to do turbo in the future you should of bought puller fan. I try to think a head. Some times it works out or not.
I wish you lived next to me so can help me finish projects. Keep up with up dates bud!

[ThatOneEuroE30]

If you plan to do turbo in the future you should of bought puller fan. I try to think a head. Some times it works out or not.
I wish you lived next to me so can help me finish projects. Keep up with up dates bud!

I think I may run two fans cause i tried putting this fan in the bay but it way to big so I will have to get like a 10 inch slim fan to pull cause with the e36 rad it takes up a bit more space, but then again this fan is where my intercooler should be. I wish we were closer to I'd love to help with your projects.

[scoobydo]

I am going down the same route for the fan would loved to have put a puller but going to have to go for the ultra thin spal, as want to also keep the air con pulley. Was looking for intercooler behind the kidney grill think it will all fit. The 333i never had an issue with overheating with the bmw fan up front, obviously the fan is much thinner so guess pushes less air, am I going to have an issue with cooling. Worse case can put an additional fan near where the steering pulley is.

[ThatOneEuroE30]

I am going down the same route for the fan would loved to have put a puller but going to have to go for the ultra thin spal, as want to also keep the air con pulley. Was looking for intercooler behind the kidney grill think it will all fit. The 333i never had an issue with overheating with the bmw fan up front, obviously the fan is much thinner so guess pushes less air, am I going to have an issue with cooling. Worse case can put an additional fan near where the steering pulley is.

Yea I will probably put a ultra thin 10 inch right above the powers steering pump but below the top hose on the rad.

[IronFreak]

So I haven't done much but I've done a little.

Got my electric Mishimoto fan put in. Its a 16" rated for 1850 cfm so it should do for now.


Got the antenna delete welded in.


also got 2 of the 3 rust spots patched. The last one spread further then the rest so I'm still making a game plan on how I'm gonna tackle it. This car has been a war on rust haha





I also got my e28 down pipes and everything to do the rear brakes I just need to do them.

Need more heat in these welds brotatoe. Granted the metal is thin I know, but you have next to no penetration, on the verge of cold roll.

[IronFreak]

....That almost rhymed haha

[ThatOneEuroE30]

Need more heat in these welds brotatoe. Granted the metal is thin I know, but you have next to no penetration, on the verge of cold roll.

To which welds are you talking about? the antenna delete? yea i was thinking the same when I looked at it again last night. gonna go back over it after class.

....That almost rhymed haha

lol almost did.

[rturbo 930]

^ I think he's referring to the welds on the rocker, I thought the same thing.

[ThatOneEuroE30]

^ I think he's referring to the welds on the rocker, I thought the same thing.

Ahh I still have to grind those down so they will get gone back over.

[IronFreak]

do it once do it right. turn your amps up.

[IronFreak]

I've stitch welded my entire chassis, turn up the amps and spot weld, you'll get plenty of penetration, anyone that says otherwise has a e-slap coming their way.

[ThatOneEuroE30]

My euro 320i complete restoration.(now with m30power)

Alright I'll do that. I had to turn it down cause I was blowing through. May have just been bad metal cause it was all on the body side.

[animal]

awesome! Just read through the whole 18 pages - can't wait for updates!