Don't know what build I am doing yet...Maybe a 2.7 turbo drift car?

[dburgoon]

Plans for the car has changed. Going to build an m20 3.0 stroker. Strip and cage the car and make a sweet track car. Once I sell my Subaru the build begins!

[dburgoon]

Engine out of the car! Time for a tear down. Stroker crank and itb's on there way!

[dburgoon]

Got the engine tore down most of the way today! Everything looks good with it

[sam_]

looks great!! sub'd

[dburgoon]

Part 1 of the ITB's are here. Just need 2 more and I'll start making the adapters. Using the throttle bodies off of a gsxr.

[2mAn]

I would do some research on sizing those ITBs properly. Most people go too big. I think 40-42mm were a good range for the M20. Id read digger's thread if you plan on building up the M20. Also I think there is different strut caps that will drop the front 15-20mm IIRC. either way keep it up

[dburgoon]

I would do some research on sizing those ITBs properly. Most people go too big. I think 40-42mm were a good range for the M20. Id read digger's thread if you plan on building up the M20. Also I think there is different strut caps that will drop the front 15-20mm IIRC. either way keep it up

Thanks, through my research people are using 38-42mm and these are 38mm so sizing shouldn't be too far off.
And as far as suspension I'm thinking about going with ground control coilover kit

[2mAn]

ahh nice. 38mm should be good, definitely not overkill. also, you wont be disappointed with the GC coils

[dburgoon]

Well after a quick mock up these throttle bodies are just not going to work. Back to the drawing board for a good intake setup.

[The Dark Side of Will]

Is the bore center wrong?

[2mAn]

Is it because there is only 4?

[nrubenstein]

Probably be about the same cost and easier to drop in an s54. Just saying...

[dburgoon]

Is the bore center wrong?

Yeah they just won't center up and just a few other little issues

Is it because there is only 4?

Thats why I said "part 1" but yes I would need 2 more

Probably be about the same cost and easier to drop in an s54. Just saying...

:hitler::hitler: Now wheres the fun in that. But yes your probably right. I might do a 3.0l Turbo build. My limiting factor is tires right now, but I just bought a set 17" tarmacs and tire choices are a lot more for 17's then for 15's. So I might just do some flares to run 245's and do a turbo m20

[Northern]

If you're set on ITB's, Bullet Ride's thread has lots of great info.
If you want an off the shelf setup, check this out.

[cgk_iii]

A member on here (bullet ride) has a very nice ITB set up that he is running on his 2.8L stroker. Take a look at his build threads very good stuff in there