Originally posted by Sh3rpak!ng
View Post
Announcement
Collapse
No announcement yet.
Bronzit E30 - OBDII S52 shaved bay - weekend/autox toy - Journey
Collapse
X
-
Originally posted by Sh3rpak!ng View PostTime to do some axle rebuilds. As a reminder, I had all of the components cryo treated in an attempt to give them a bit more strength rather than upgrade to the $1500+ kit. In hindsight I should have just bought a pair of axles from FCP and gotten myself on the lifetime warranty train.
Garagistic bushings don’t fit properly… look at the aluminum bushing race poking out the bottom…
Garagistic bushing fitment with the bracket installed. Theres a 8mm gap between bracket and bushing. Frustrating.
The poor fitment is surprising, seems like an easy thing for them to measure and get right in the first place. Have you contacted them? I mean what's the point of tightening the bolt against the sleeve, it's supposed to compress the poly bushing, right?
Comment
-
Originally posted by 2mAn View Post
The beauty of build threads!
Originally posted by Dj Buttchug View PostThe attention to detail in this thread is astonishing. What an epic journey! The wiring harness work is absolutely amazing.
Originally posted by Chilezen View Post
I hopped on that train for my engine rebuild. So far I've had to use the warranty a few times for big and little things, and I'm very glad I did. I admire your determination to rebuild axles though, that's a lot of work!
The poor fitment is surprising, seems like an easy thing for them to measure and get right in the first place. Have you contacted them? I mean what's the point of tightening the bolt against the sleeve, it's supposed to compress the poly bushing, right?
Regarding the poor garagistic bushing fit - I don't understand it either. Yes I did contact them but they didn't have much to say really. Seemed like they were also stumped. I am fairly certain that it's a design flaw. The AKG bushings which were in prior fit fine and it was clear when comparing the two side to side where the issue would arise. Ultimately I just modified the bushings to fit and moved on. They asked for more measurements but I have other things I need to work on now.
Comment
Comment