Turbo M10 Build Thread, Running MS1 3.0

[LegoTheBimmer]

Hello R3V! as you can tell from the title i am doing a turbo build on my Safari Beige M10 car. this first post is everything im using and have:

Megasquirt 1 3.0

Megasquirt wiring harness, pre-labeled

GM CLT/IAT sensors

Nissan 300zx TPS

42lb Fuel Injectors

EDIS from ford escort

HSV turbo manifold, bottom mount

Egay a/r.50 Turbocharger internal wastegate

02Again.com Custom Crank Pulley with Trigger wheel for EDIS Sensor.

02again.com Sensor mount using Water Pump bolts.

Ebay boost controller

2.5" intercooler piping and CXracing intercooler

Soon to be 2.5" Exhaust aswell.


I know im missing a few bits, like little Misc. items.. But stay tuned for other information on my build, like photos. Note: i have already started the build but i just now started R3V.. Thanks Kingston! More to come.

[R1dd1ck913]

I would love to see some pics. Hell I would love to see it in person. I'm close enough.

[LegoTheBimmer]

I am having a problem with uploading pictures, But as of now everything i have done is:

Intercooler installed

Distributor removed and Plug installed(much cleaner)

New Crank pulley and EDIS Sensor mount installed

A/C compressor out.

Nissan 300zx TPS is on.

**Still trying to find best ways to route the harness and where to tap the Coolant Neck for CLT sensor.**

[2mAn]

looking forward to this. Big Fan of the M10 turbo here

[King Mufasa]

:-@ pics

[LegoTheBimmer]

Updated

i have used flickr, and other sites.. even uploading a pc file, keeps saying "invalid file" so here are links...

This is the Distributor plug.

https://www.flickr.com/photos/130740348@N07/16620966555/in/photostream/

Everything i have pulled so far (not up to date)

https://www.flickr.com/photos/130740348@N07/16413672487/in/photostream/

The Crankshaft pulley and trigger wheel

https://www.flickr.com/photos/130740348@N07/16413672747/in/photostream/

10 foot harness from DIYautotune ( i have it "installed" but not yet wired)

https://www.flickr.com/photos/130740348@N07/15998787914/in/photostream/

42lb high impendance injectors

https://www.flickr.com/photos/130740348@N07/15998788864/in/photostream/

Spot the intercooler?

https://www.flickr.com/photos/130740348@N07/16619851051/in/photostream/

close up on plug.

https://www.flickr.com/photos/130740348@N07/16433975740/in/photostream/

Crank pulley and sensor with mount.

https://www.flickr.com/photos/130740348@N07/16413668167/in/photostream/

Old harness out... was a pain...

https://www.flickr.com/photos/130740348@N07/16001203653/in/photostream/

Decided to pick up this fuse block to get power to injectors/ecu etc.

https://www.flickr.com/photos/130740348@N07/16620961235/in/photostream/

Same thing but installed^

https://www.flickr.com/photos/130740348@N07/16413689537/in/photostream/

random pic

https://www.flickr.com/photos/130740348@N07/16620965115/in/photostream/

So, while in the middle of this i ordered some IE stage 3 springs and bilstein sports. i had joms before and needed some race suspension.

https://www.flickr.com/photos/130740348@N07/16433953370/in/photostream/

More photos will come later, i thought i had more.. stay ///Tuned

[Dj Buttchug]

Op like this bru

























Yes, I just embedded all your pics. This thread is gangster. Carry on, but not without displaying pics proper

[LegoTheBimmer]

I would love to see some pics. Hell I would love to see it in person. I'm close enough.

If you want man, build is being delayed because i lost privleges to borrow this shop. trying to figure something out. pm me if you want to check it out.

[LegoTheBimmer]

Nevermind thought i figured it out.... i need help!!

[Dj Buttchug]

embed the " code" into the post. itll look like this

[ url=https:/www.flickr.com/photos/1307448@N07/16433953370/][img]https://farm9.staticflickr.com/8670/16433953370_b3a64df5d8_b.jpg[img][/url]

[Good & Tight]

Are you boosting the stock engine?

[2mAn]

Very cool car!!

Keep it up!

[LegoTheBimmer]

Are you boosting the stock engine?

Yes, going to wait for a head rebuild and turbo regrind for cam. also ARP head studs will come later/soon.

[LegoTheBimmer]

Decided to go a different route with ignition system, Ordered some LS1 coils. Selling my EDIS stuff so PM me if interested, (EDIS module, Coil pack, trigger wheel, Ford harness, and brand new spark plug wires)

[LegoTheBimmer]

Update: I installed the Turbo and Manifold but opened the wastegate with a zip tie so it will not create boost for base tune on MS. Also got my car towed back from the other shop, Photos to come very soon.