Love your thread and photography. It inspires me to go wrench on my car. It'll look awesome with that front valence painted and installed. You should get the pin stripping done on the new fender to continue with the theme and match the rest of the car!
Garagetotal Kuhfänger
Collapse
X
-
1988 325 Lachs Sedan SOLD
1989 325i Bronzit Beige 2 Door
SOLD
2018 Volkswagen Alltrack SE DSG
Past:1988 325iS Lachs 5 Speed -
Comment
-
If you're from a rural area, on backroads you'll see grates that are built across the width of the road that keep cows from going places you don't want them too. They can't cross the grates or they'll get stuck.Comment
-
^ While mostly factually correct, there's not really any connection I'm aware of between the grates in a road and the front valence of an ('87) E30.
The cow catcher name comes from the triangular frame built onto the fronts of trains, and even some 18 wheelers, which is designed to forcibly move large objects (livestock) out of the way without having to slow down.
Comment
-
^ While mostly factually correct, there's not really any connection I'm aware of between the grates in a road and the front valence of an ('87) E30.
The cow catcher name comes from the triangular frame built onto the fronts of trains, and even some 18 wheelers, which is designed to forcibly move large objects (livestock) out of the way without having to slow down.
Comment
-
lolol I assumed because of the grates but it never really made sense to me that that would transfer to an e30 valance...either way its kind of hilariousComment
-
Alright. Still no reply from KAMotors. I took a photo of where the filter enclosure is hitting.
Circle A is the top of the ABS. Circle B is the line coming out of the radiator towards the firewall and down.
I can't close the hood with the filter bolted up because it sits atop the ABS. I can't divert it to the right side like I see in all the photos because the side of the filter meets that line from the radiator.
Since KAMotors won't respond I need you guys' help.
Comment
-
-
-
-
Comment
-
Alright. Still no reply from KAMotors. I took a photo of where the filter enclosure is hitting.
Circle A is the top of the ABS. Circle B is the line coming out of the radiator towards the firewall and down.
I can't close the hood with the filter bolted up because it sits atop the ABS. I can't divert it to the right side like I see in all the photos because the side of the filter meets that line from the radiator.
Since KAMotors won't respond I need you guys' help.
Your not doing something right, pic of it somewhat installed? I've seen these installed on swapped cars and b25/27 and there's no issue. I can see your trans cooler line hitting it but other than that that's it.
Sent from my iPhone using TapatalkComment
-
Ill send a photo of it mocked up by the end of today.Comment
Comment