*!Build of the year candidate!* Strange PNW Build: E30+Volvo

[Northern]

I don't know if you're willing to share what you're doing for mould release (and is that blue tape - 3M 8902?)?

Finished product looks sweet.

[adam.nonis]

I don't know if you're willing to share what you're doing for mould release (and is that blue tape - 3M 8902?)?

Finished product looks sweet.

I don't gate keep any info. I generally do Partall paste wax and PVA. The blue tape is just generally referred to as “flange tape” and nothing sticks to it. On the inner portion of the part, I didn't use any mold release, just completely covered with tape.

https://www.fibreglast.com/product/flash-tape-00584

Sent from my iPhone using Tapatalk Pro

[Northern]

Love it, thank you. Unfortunately seems to be about as expensive as any of the 3M versions, most of the stuff I have is time expired aviation crap, either PTFE 3M 5491 (which is flexible and great, except it sticks like hell and the adhesive sometimes separates and stays behind) or the polyester 'green tape' 3M 8992 (doesn't stretch at all, so no compound curves)

From the pictures, that looks like a nice in-between, which would be way more useful despite the cost lol

[adam.nonis]

Love it, thank you. Unfortunately seems to be about as expensive as any of the 3M versions, most of the stuff I have is time expired aviation crap, either PTFE 3M 5491 (which is flexible and great, except it sticks like hell and the adhesive sometimes separates and stays behind) or the polyester 'green tape' 3M 8992 (doesn't stretch at all, so no compound curves)

From the pictures, that looks like a nice in-between, which would be way more useful despite the cost lol

As I get older, I realize there's a trade-off of time or money. These days my time is far more valuable than spending too much for some tape. I understand though. I'm cheap. The main reason I make everything myself.


Sent from my iPhone using Tapatalk Pro

[CubbyChowder]

That bumper looks great

[adam.nonis]

Picinic


Sent from my iPhone using Tapatalk Pro

[Donkeyshins]

Picinic


Sent from my iPhone using Tapatalk Pro

Next to an M3 and a Touring. <chef's kiss>

[adam.nonis]

Ok, installed some BC coilovers this weekend (didn't really take pics cause that's pretty saturated out there) and stuffed the trans onto my engine with a single mass flywheel kit. The. Dropped it onto my fancy trolley I made for the guys at Strassen to pull and install E30 stuff once I'm done with it. Can pull assemblies with, or without the subframe. Good for pressure washing or dry ice blasting too.






Sent from my iPhone using Tapatalk Pro

[Northern]

Hands down the best looking N52

[adam.nonis]

Aaaaaannd heeeeeere we gooo..,,




Sent from my iPhone using Tapatalk Pro

[Donkeyshins]

Crossing fingers here.

[adam.nonis]

Test fit number one





Sent from my iPhone using Tapatalk Pro

[adam.nonis]

Let's see. New coolant tank needed, bigger firewall grommet, room for new air filter and had a batch of stickers made to commemorate to swap.





Sent from my iPhone using Tapatalk Pro

[Donkeyshins]

Let's see. New coolant tank needed, bigger firewall grommet, room for new air filter and had a batch of stickers made to commemorate to swap.





Sent from my iPhone using Tapatalk Pro

You need an additional sticker showing an E9x underneath the Volvo and E30. 😂

[adam.nonis]

Photo dump. Getting closer every day.









Sent from my iPhone using Tapatalk Pro