Announcement

Collapse
No announcement yet.

The Official List-Your-Mods Thread

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #46
    Originally posted by E30 Reaktionär View Post
    Nope don't have any F&F dvd's, but i do have Two Lane Blacktop on dvd

    YES. That is all.

    I'll write a mod list when it's finished, expect a 2000 word essay.

    Lsx/t56 Swap progress |----------| .0000000005% - Well below poverty line.
    Getting purists panties in a knot since 2007. ;)
    E30 count = 6! :shock:

    Comment


      #47
      Originally posted by Ahheck01 View Post
      Just FYI, I owned a '95 ti with an OBD1 converted S52 with cams (as you described, essentially), and during my ownership all I could ever think was "man, I messed up by putting this swap in a ti... what I wouldn't give to put it in a proper e36"

      The e36 rear suspension makes a world of difference - especially when it comes to handling that power.

      Not to mention it looks significantly better.

      -Evan
      I had a `95 Ti which was sort of an in between car after my S50 E30 and the following "proper" E36. I went back to a Ti for a reason...I prefer it. Yes, the multilink is nice for comfort and added high speed stability in turns but the semi-trailing arm setup can work fine and the limit of my car is higher than I will be going on the street anyway. Having owned and driven a handful 24v E30's, I'm not afraid of handling a little extra kick in the Ti. I have ridden in the Rouge 330ti which felt awesome btw.

      Not to mention I don't have to deal with subframe tearing, my curb weight is a rather light 2,750 lbs., I'm nearly 10 in. shorter than an E36 and 4 in. shorter than an E30, I actually have headroom as the E36 coupes have a lower roofline which in turns puts my hair against the ceiling. I also find all E36's boring looking but at least my car is more rare compared to all the coupes/sedans.
      Last edited by windnsea00; 05-31-2007, 10:47 AM.
      Past: 1991 330is; 1995 318ti; 1993 325is; 1997 318ti; 1989 332is; 1999 Z3 M Coupe

      Comment


        #48
        Originally posted by windnsea00 View Post
        I had a `95 Ti which was sort of an in between car after my S50 E30 and the following "proper" E36. I went back to a Ti for a reason...I prefer it. Yes, the multilink is nice for comfort and added high speed stability in turns but the semi-trailing arm setup can work fine and the limit of my car is higher than I will be going on the street anyway. Having owned and driven a handful 24v E30's, I'm not afraid of handling a little extra kick in the Ti. I have ridden in the Rouge 330ti which felt awesome btw.

        Not to mention I don't have to deal with subframe tearing, my curb weight is a rather light 2,750 lbs., I'm nearly 10 in. shorter than an E36 and 4 in. shorter than an E30, I actually have headroom as the E36 coupes have a lower roofline which in turns puts my hair against the ceiling. I also find all E36's boring looking but at least my car is more rare compared to all the coupes/sedans.
        I came across your car recently on another board, and I wanted to tell you I friggin love it. Perfect Ti man.

        -Jay

        Comment


          #49
          Originally posted by Mystikal View Post
          I came across your car recently on another board, and I wanted to tell you I friggin love it. Perfect Ti man.

          -Jay
          Thank you very much!
          Past: 1991 330is; 1995 318ti; 1993 325is; 1997 318ti; 1989 332is; 1999 Z3 M Coupe

          Comment


            #50




            1989 325i

            Engine Modifications:

            S50 and 5 speed tranny out of a 95 M3 with approximately 63k on it
            VAC Motorsports Stage 1 Head with BMW Motorsport Dual Valve Springs
            VAC Motorsports Timing Chain, Cam Chain, and Oil Pump Chain
            Welded Oil Pump nut
            Fan delete with 318ti thermostat and Motorsport nut
            Spal 16 inch Electric pusher fan
            ARP Head Studs
            European spec 3.5 inch HFM
            24lb. Injectors
            Schrick Cams
            Ground Control Green Gizmo
            Brand new S52 Primary Tensioner
            Benfer Powdercoated Valve Cover
            Metal water pump
            Metal Thermostat Housing
            PWR Aluminum Radiator
            Aluminum catch can for coolant overflow
            OBD2 Headers with ports welded and Headers wrapped
            Custom 2.5 inch exhaust, no cat, Dynomax Muffler
            All brand new parts used for the conversion: E34 oil pan, Motor mounts, motor mount arms

            Drivetrain Modifications:

            UUC 8.5lb. Flywheel
            E34 M5 clutch
            Rogue Engineering WSR
            UUC EVO 3 SSK
            UUC TME’s (red)
            UUC Underdrive Pulley’s
            E30 M3 Driveshaft, Guibo, Shift carrier
            3.73 LSD and 3.46 LSD Differentials
            M Coupe Finned Diff Cover
            Redline fluids for tranny and diff’s

            Electronics/Engine Management:

            Turner/Conforti Software (soon to be EvoSport)
            Brand new Vanos and Solenoid

            Exterior/Interio/Safety:

            Recaro SRD’s with Sub hole
            BMP Gauge Clusters (Instrument and vent)
            VDO Vision Gauges (Speedo, Tach with recall, Oil Pressure, Oil Temp, Volt, Gas, Water Temp, Diff Temp)
            Momo Monte Carlo 350mm wheel (Street)
            Momo Mod78 350mm wheel (Track)
            Auto Technique Quick Release hubs
            TCDesign/Jaffster Delrin Shift Knob
            Factory Interior completely stripped and replaced with lightweight carpet
            Onboard Lap Counting
            Alpine Stereo system(very discrete)
            Factory IS Front Lip
            Euro Bumper Moldings
            French Headlights
            Smoked Front Turn Signals
            Evo Hood Seals
            David Raye Engineering Roll Cage
            Sparco 5 point belts
            SPA On Board Fire System

            Suspension:

            European E30 non-power steering rack
            Turner Motorsports J-Stock Kit with Specially valved Bilstien’s and H+R springs
            Dinan Fixed Camber Plate(front)
            BMW Offset Front Strut Mount
            Turner Motorsports Rear upper Strut Mount
            Turner Rear upper Reinforcement plates
            Suspension Techniques Swaybars
            Turner Motorsports Front Swaybar reinforcement
            Turner Motorsports Rear Swaybar reinforcement
            Ireland Racing Front Adjustable Sway Bar links
            Suspension Techniques Rear Adjustable Sway Bar links
            Turner Motorsport Rear Trailing Arm Sway Bar mount reinforcement
            Powerflex Front Control Arm Bushings
            Ireland Racing Rear Subframe Bushings
            Ireland Racing Rear Control Arm Bushings
            M3 Aluminum Front Control Arms
            Sparco Front Strut Bar
            Roll cage is tied into rear towers and “Boxed out” to reinforce rear towers

            Brakes:

            Zimmerman Cross Drilled Front and Rear Rotors, Cryogenically treated
            Rebuilt Calipers with Turner Motorsports guide pins(rear)
            Braided Stainless Brake lines
            Motul 5.1 Fluid
            E21 Brake booster

            Wheels:

            Street - 16x7 BBS RS 003's with 225/50-16 Yokohama AVSES100s

            Track - 15x7 Team Dynamics Pro Race 1.0's with 225/45-15 Avon Tech-Rs

            Comment


              #51
              1988 325is 5spd Sterling Grey Metallic


              Exterior:
              Bumper Swap
              Euro Trim
              Euro plate filler w/swedish plate
              Euro Grills
              Euro Smoked Ellips
              6000K h1's / 3000K h3's
              MHW turns
              MHW taillights
              Mtech 1 trunk spoiler
              Zender skirts
              Detextured front valence/painted rear valence+rockers
              IS lip w/ RyanG splitter
              Shadowlined everything
              Full Respray in 06/2006
              Satin Black Kopis 17x7.5
              30% tint front/ 20% tint rear

              Interior:
              Black vinyl sport seats + rear seat
              Rear headrests
              SPARCO Harness Bar
              Scroth Rallye 4 Harness
              Updated rear deck
              Euro grey cloth insert door cards
              leather boot/ebrake/handle
              Momo Competition
              Pioneer deck
              JL components front / Infinity components rear
              12" Kicker Competition in open box (sucks)
              400W 4channel Kenwood amp
              200W 1mono Kenwood amp

              Suspension:
              Ground Control 450/700 perches + springs
              Konis short body top adj. F & R
              E30 M3 offset CAB
              E30 M3 style strut mounted swap bar tabs
              Adjustable swap bar end links
              IE front strut bar
              TCK billet RSM
              Vorschlag Motorforce Camber Plates
              Axxis Pads
              ATE Elliptical slotted rotors

              Drivetrain:
              install in process...
              rebuilt s50b30 95M3 motor
              SS long tube headers
              CAI
              Turner Chip
              SouthBend DXD Stage3 Clutch (m20 model) w/shaved m20 flywheel
              SS clutch line
              Custom Exhaust
              UUC Stage3 Shift Kit
              325IX booster + e34 m5 master cylinder
              95M3 3.0 Rack + all E36 steering Hardware
              Last edited by golde30; 08-16-2007, 09:35 PM.
              IG: @Baye30

              FRONT VALENCE IS ZENDER!!! STOP FILLING MY PM BOX PPL!!!

              Comment


                #52
                1987 325es



                Factory opt: cc,p/w,p/l,p/sunroof,13butt. OBC with remote,rear defrost,upgraded stereo,a/c,black leater int.

                Color:
                Schwarz with red pin stripe

                Int. color:
                Crimson (dark red)
                (was black leather)

                Under the hood:
                2.7 eta
                deleted the TB coolant
                IE long tube header's
                Lucas heatshield
                K&N cone type air filter

                Exhaust
                2 1/4" duels with no cats.
                18"glasspacks with 2 1/2" round stainless tips

                Trans:
                5speed

                rear diff:
                2.97lsd

                Susp.
                lowtec 60/50
                IE front strut brace
                M3 CAB's

                Wheels:
                Drag 15x7 et10
                195/55 15 tires

                Ext. mods:
                iner shadowlined
                Kamei eyebrows (gloss black)
                Kamei windsplitters (thing ontop of the fenders)
                Kamei rear deck spoiler
                Euro ellips "smileys" with 6K HID's
                euro pass. side mirror delete plate
                rear euro plate filler
                chrome euro bumpers front and rear
                Zender front spoiler
                Zender rear apron
                splitter on front spoiler
                euro fogs with 6k Hid's
                MHW smoked turn signal lenses
                old school BMW motorsports emblems front and back
                ford taurus side skirts
                all red tails with rear euro fog
                Scotish front plate
                DTM side mirror


                Int. mods:
                Euro cluster
                german 13 butt. OBC
                german check panel
                euro fog light switch
                chrome gauge rings
                center console with tape player storage
                black door pulls & map pockets
                ///M lighted shift knob
                black leather shift and e-brake boots with red stiching
                black Motorsport floor mats
                maplight mirror
                M-tech 1 steering wheel with old school motorsports emblem
                12GA. shot gun shell cig. lighter
                George Graves light dimmer
                duel trunk lights
                factory trunk storage tray







                Will update list as i mod. the car.
                Last edited by JasonC; 03-11-2008, 11:42 PM.

                1992 BMW 325iC
                1978 Chevrolet Monte Carlo
                1965 Chevrolet Corvair Monza 140hp

                Comment


                  #53
                  Originally posted by Ahheck01 View Post
                  The e36 rear suspension makes a world of difference - especially when it comes to handling that power.

                  Not to mention it looks significantly better.

                  -Evan
                  Pleeease

                  the E30 semi-trailing arm suspension would help the car slide so much more easily than an E36's multilink suspension setup.
                  R.I.P 07/01/09 - 04/23/10 :(

                  Comment


                    #54
                    I am starting my list now. Have it posted in 2 months. lol
                    sigpic

                    Comment


                      #55
                      Engine: SR20DET
                      Toda 256 cams
                      Greddy RAS
                      550cc Power Enterprise injectors
                      Walbro 255 lph fuel pump
                      Yashio Factory exhaust manifold
                      Power Enterprise 1420 Super Response series turbo
                      Aluminum accessory pulleys
                      Unorthodox alloy crank pully
                      GP Sports Braided coolant/oil lines
                      Spiltfire coil packs/igniter
                      NGK 7 plugs
                      Megan Racing elbow
                      Greddy 3 inch downpipe
                      Greddy High Capacity oil pan
                      Hybrid Liquid to air intake manifold/intercooler of my own design(half nissan, half Cobalt SS-Laminova cores)
                      Volvo radiator and heat exchanger with dual Audi coolant pumps.

                      Transmission
                      Stock transmission with short shifter
                      ACT 9lb flywheel
                      ACT 6 puck unsprung clutch
                      Custom driveshaft

                      Differential
                      Stock 3.73 with M-cover

                      Suspension and Chassis
                      Bilstein Sport struts and shocks
                      N.O.S Koni sport springs (.5 inch drop)
                      N.O.S Koni sway bars with adjustable links
                      Poly subframe, trailing arm and control arm bushings
                      Mason aluminum front and rear strut tower braces

                      Brakes
                      E30 master with 2002 booster
                      Remote resevoir set up from 2002
                      ATE front rotors
                      Powerslot rear rotors
                      Hawk HPS pads F+R

                      Wheels and tires
                      Falken Hanabi 17x7.5 32 offset
                      215/40/17 Falken Azenis RT-615
                      Converted to studs, 3mm hub spacer front, no spacer rear.

                      Interior
                      Sparco Pro-2000 seat with Momo harness
                      Knockoff Momo wheel
                      Eagle talon shift knob
                      Apex'i Tachometer
                      Power Enterprise combination Boost controller/Gauge
                      Misc oil and water temp and pressure gauges.

                      Exterior
                      Faded grey paint
                      Blacked out grill
                      90w h4 white low beam
                      100w h1 yellow high beam
                      Neat Ebay taillights

                      99 percent of the work on this car is done by yours truly. I still have to finish up cooling system and electrical details but should be running by the fall!
                      Attached Files

                      Comment


                        #56
                        Wow some very nice rides in this thread.

                        I especially like the 90 325 with S50 and M3 suspension/lugs. Would be an awesome daily, the way BMW would have done it
                        Last edited by thull; 08-12-2007, 01:31 PM.
                        Brian
                        89 M3 2.5 - 91 318iS - 91 325iX - 06 X5 4.8iS - 03 525i Touring - Some 91 850s, and a few parts cars...

                        Comment


                          #57
                          Here's my 89 M3:

                          engine:
                          BMW Evo3 crank
                          Ross 11.25:1 pistons
                          Total Seal rings
                          Pauter rods
                          BMW Evo3 air box
                          K&N filter
                          Evo3 AFM
                          48mm throttle bodies
                          larger M3 injectors
                          adj. fuel pressure reg
                          Don Fields ported head
                          Schrick 284/276 cams
                          Schrick valve springs
                          Group N header
                          TMS header studs
                          Raven stainless exhaust
                          Turner software
                          Magnecor wires
                          Turner 8lb flywheel
                          Sachs HD clutch
                          Aluminum mounts

                          suspension:
                          Turner JStock kit:
                          TMS/Eibach coils
                          TMS/Bilstein shocks
                          e30 "crash mounts"
                          e46 rear mounts
                          Delrin bushings
                          TMS reinforcements
                          TMS sway bars
                          Sparco strut bars

                          brakes:
                          OEM cryo-treated rotors
                          Porterfield R4 pads
                          Fischer stainless lines
                          25mm master cylinder
                          AP600 fluid

                          wheels and tires:
                          BMW "M Parallel" 18x8 et13
                          Toyo RA-1 225/40R18
                          nitrogen fill

                          lightness added:
                          carbon fiber hood
                          carbon fiber rear wing
                          Vladen front bumper
                          Konig seats
                          carbon fiber mirrors
                          carbon fiber splitter
                          trunk carpet sold
                          stereo uninstalled
                          a/c ripped out
                          spare tire in garage
                          rear seat in a 318
                          cruise control sold
                          no wiper fluid system
                          more to come...

                          interior:
                          Autopower 4pt roll bar
                          Ultrashield harnesses
                          Konig seats
                          Evo3 suede wheel
                          E36 M3 shift knob
                          suede shift boot
                          Evo3 suede e-brake
                          Z8 shifter
                          GaugeCo gauges
                          Llumar tint
                          aluminum pedal set

                          body extras:
                          black grilles
                          Evo3 hood seals
                          TMS clear marker lights
                          red rear marker lights
                          red emblems

                          Picture - more here
                          Brian
                          89 M3 2.5 - 91 318iS - 91 325iX - 06 X5 4.8iS - 03 525i Touring - Some 91 850s, and a few parts cars...

                          Comment


                            #58
                            Now paint those M-Pars black! :)

                            I like it! Well played sir.
                            sigpic

                            Comment


                              #59
                              I think that will be in the future, as well as a lower front stance and a BBK
                              Brian
                              89 M3 2.5 - 91 318iS - 91 325iX - 06 X5 4.8iS - 03 525i Touring - Some 91 850s, and a few parts cars...

                              Comment


                                #60
                                If I may, 84 318i.



                                engine/tranny/diff
                                Stock m10 with all new belts, hoses and electrical and cooling.
                                Ansa sport exhaust
                                New clutch, cylinders and flywheel, guibo etc.
                                IE engine and tranny mounts
                                rebuilt 3.73 lsd
                                All new shifter components (not installed yet)

                                suspension/steering:
                                Bilstein sport inserts
                                Ground Control kit 500front/650rear
                                Ground Control camber plate
                                Sparco front bar
                                New control arms with e36 m3 control arm bushings
                                e36 rack (not installed yet)

                                brakes:
                                OEM 325i front/rear brakes
                                OEM 325 MC and new lines
                                Motul 600fluid
                                Carbotech pads (not installed yet)

                                wheels and tires:
                                14" basketweaves
                                falken azenis rt615s

                                interior:
                                corbeau trs seats
                                momo montecarlo steering wheel
                                late e30 dash
                                microsuede boots, oem mats
                                cluster gauge rings, si board delete

                                body
                                euro grills
                                rear us plate filler
                                oem ellipsoids
                                valance swap
                                plastic bumper swap
                                a/c and fan clutch delete

                                to come :
                                rear lip and valance of some kind
                                newly rebuild engine
                                bbk, cage and wheels.
                                Last edited by Jean; 08-16-2007, 10:11 PM.
                                Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205



                                OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827

                                Comment

                                Working...
                                X