What did you do to your E30 today?

[KatFish]

I installed some SS Headers. They look and sound awesome, but they were a pain in the aSS to install. Fortunately I had a torch around to make a few needed adjustments in the bends.

My advice to people getting headers! Get a well known and trusted brand, so you don't have to use a torch and a lift to get your shit straight.
Performance gains were very noticable in the 4-6K rpm range. I also accidentally broke the rear "factory" dry rotted doggy chew toy exhaust mounts (insulators) trying to cram my oversized shiney exhaust back in there. I had to make some custom ones, to hold me over till I can get some OEM replacements at pet depot.

When the OEM hangers come in I'm going to weld the pipes together. The autozone exhaust clamps suck and they are way to ugly on a SS system.

[CHIF8008]

gave her a wash today

[KatFish]

Installed some new wheels and tires.

DForce 13Lb Silver Race Wheels, wrapped with some falken 912's 225/50/15's. The car now handles amazing. stopping power and highspeed corning has been improved drastically.

Now to find a way to get a BMW logo looking good on the center cap.

I was very impressed with the Wheels/rubber. Two of the wheels balanced out perfectly with no weights at all. The other two were only off by a few grams, I've never seen that happen before. And the guy at the tire shop said it's rare.

[Beach Bum]

Installed some new wheels and tires.

DForce 13Lb Silver Race Wheels, wrapped with some falken 912's 225/50/15's. The car now handles amazing. stopping power and highspeed corning has been improved drastically.

Now to find a way to get a BMW logo looking good on the center cap.

I was very impressed with the Wheels/rubber. Two of the wheels balanced out perfectly with no weights at all. The other two were only off by a few grams, I've never seen that happen before. And the guy at the tire shop said it's rare.

If you think the 912's are nice, get yourself a set of Hankook R-S3's. Beware, they're pretty much 10k mi. tires though. I use them on my ST AutoX cars.

[mr2peak]

Removed the subframe and changed the diff gasket and fluid. Installed my steel braided brake lines and half way installed a set of calipers that I rebuilt 3 months ago. Moved all the AKG bushings to the new subframe and A-arms. Bolted up the A-arms and the diff to the new RTAB subframe. Tomorrow it all goes back together!

[mr2peak]

Put it all back together! Changed the oil and filter and went for a drive :)

[dr.strangelove]

finally got my interior back together. what a relief.

[e30m3s54turbo]

Adding parts to my wtb Alpina B6 3.5

[Charley]

Dismantled the M3 calipers. Dropping them at the powder coater tomorrow.

[ButtJuice]

Got it smogged! it passed :)

[mr2peak]

Got it smogged! it passed :)

Nice! I've got to tackle that soon

[mr2peak]

Replaced a wheel bearing that has been howling for way too long, then went for a ride in my friends girls new 135i. My m50 is really slow.

[CHIF8008]

found out that my window circuit breaker is tripped and my window motors are bad. where can i find the circuit breaker? looked everywhere ....

[White5]

Stripped the lips on my euroweaves I just bought. Tires this week!

[Pac1373]

Repaired the non working drivers electric window. like a boss.