Several months later, my 3.1liter s50 is finally finished. Built it from bare block to this on saturday:
Sorry no assembly pictures, once I start working, i dont stop to take pictures. Thoughts on color choice?
It is an 87mm bore with maxsil 10.5:1 (stock oversize) pistons, block was tanked bored, crank cleaned and polished. Head was completely disassembled, cleaned, hand lapped each valve, installed new seals. All new bearings and seals. Cleaned and polished all vanos moving parts. Waiting on donor parts from the m50 in the car now to be fully complete. Dont know when it will be in the car, hopefully soon, but I still need to get software, and some upgrades.
Sorry no assembly pictures, once I start working, i dont stop to take pictures. Thoughts on color choice?
It is an 87mm bore with maxsil 10.5:1 (stock oversize) pistons, block was tanked bored, crank cleaned and polished. Head was completely disassembled, cleaned, hand lapped each valve, installed new seals. All new bearings and seals. Cleaned and polished all vanos moving parts. Waiting on donor parts from the m50 in the car now to be fully complete. Dont know when it will be in the car, hopefully soon, but I still need to get software, and some upgrades.
Comment