Nonsense Thread

[Beamerboi]

Already told you, 42.

Lol 42 what?


Sent from my iPhone using Tapatalk

[Powling]

42 units

[Beamerboi]

42 units

Thank you.


Sent from my iPhone using Tapatalk

[roguetoaster]

42 units

This is correct.

[Beamerboi]

This is correct.

Sent from my iPhone using Tapatalk

[Beamerboi]

Thinking about taking off the restrictor plate off the gold dragon idk if it’s exactly street legal?


Sent from my iPhone using Tapatalk

[Beamerboi]

Eleventy-seven...



-Patrick Star

And how much blinker fluid?


Sent from my iPhone using Tapatalk

[LowR3V'in]

are the rear wheel bearings reusable if the hub comes out without brakeing them as they usually do?

[Joe G]

Wheel bearings should only be reused as a means of filling yout getrag 260 with 42 units of transmission fluid.

[Beamerboi]

Wheel bearings should only be reused as a means of filling yout getrag 260 with 42 units of transmission fluid.

What about my exhaust bearings they gotta be worn should I change them as well?


Sent from my iPhone using Tapatalk

[Beamerboi]

Ok I have a nonsensical challenge for you R3V show me the worse rap videos you can find. No I don’t wanna see the neck guys find something raw and horrible. This is my submission but I kinda love this song.

https://youtu.be/DUwZvyuWaKw

Sent from my iPhone using Tapatalk

[ForcedFirebird]

beamerboi 2 quarts of MTL for the g260, you will have some left over...

http://bfy.tw/MVBj

lowr3v'in how the hell did you get the hub out? It's a press fit. As a side note, you can reuse bearings if they have been split, as long as the cages aren't damaged - a lot of racers actually split them and replace the stock grease with high temp stuff.

Guys... I’m in Argentina for a few days and look what my hotel room has....

My wife's late father was plumber. He installed a bidet for a customer - they had more money than sense (this was in the mid 80's), so they asked what it was actually for. It was brand new, he just installed it, so he turned it on, and proceeded to lean over and drink from it and replied "it's a drinking fountain" and left.

[Beamerboi]

beamerboi 2 quarts of MTL for the g260, you will have some left over...

http://bfy.tw/MVBj

lowr3v'in how the hell did you get the hub out? It's a press fit. As a side note, you can reuse bearings if they have been split, as long as the cages aren't damaged - a lot of racers actually split them and replace the stock grease with high temp stuff.






My wife's late father was plumber. He installed a bidet for a customer - they had more money than sense (this was in the mid 80's), so they asked what it was actually for. It was brand new, he just installed it, so he turned it on, and proceeded to lean over and drink from it and replied "it's a drinking fountain" and left.

Thank you I put 2 quarts of this is that ok?


Sent from my iPhone using Tapatalk

[ForcedFirebird]

That works, but is better in cold climates. Down here in greater Miami area I run MTL or MT90. MTL is 75w85, MT90 is 75w90 both are GL4. The ATF is a bit thin.

[Beamerboi]

That works, but is better in cold climates. Down here in greater Miami area I run MTL or MT90. MTL is 75w85, MT90 is 75w90 both are GL4. The ATF is a bit thin.

I see. It has been really cold in CA but summers are pretty hot in the Inland empire.



Sent from my iPhone using Tapatalk