Announcement
Collapse
No announcement yet.
Mk60e5 ABS
Collapse
X
-
This is another good MK60 resource on Facebook: https://www.facebook.com/groups/1056638784424876
-
As a public service, there's now a signal converter that will let you use your stock e30 sensors and rings with the E5. It's pretty slick...
New "Selectable Hall/VR" variant available now! See details below about Hall sensor support. Unlocks modern Mk60-family ABS controllers on older vehicles with "passive" VR wheel speed sensors. No need to modify your hubs/knuckles/axles to upgrade your braking! Compatible ABS modules: MK60 from BMW E46 (RWD, 2003+) and
- Likes 1
Leave a comment:
-
Originally posted by rtm729 View PostHow did you wire the MK60e5 to the OBD2 port? Working on my setup trying to power unit on the bunch and cant seem to connect to INPA.
If you can't find it there lemme know, it's pretty easy.
Leave a comment:
-
How did you wire the MK60e5 to the OBD2 port? Working on my setup trying to power unit on the bunch and cant seem to connect to INPA.
Leave a comment:
-
Originally posted by Digitalwave View PostIf your unit is flashed and you can get into the CANBUS, there's a lot of cool stuff you can do to make it even better, and a lot of good data to log.
Leave a comment:
-
Originally posted by redneckvtek View PostAre these the rings you went with?
https://a.co/d/0Alrk8H
Leave a comment:
-
If your unit is flashed and you can get into the CANBUS, there's a lot of cool stuff you can do to make it even better, and a lot of good data to log.
Leave a comment:
-
Great to see someone getting the E5 to work so easily. I have an MK60 M3 CSL in another car, but now they cost so damn much (plus the cost of the CSL flash) I need a cheaper option. Definitely picking up an E5 unit soon to test.
It's really nice to see people putting ABS into cars, instead of just ripping it out.
Leave a comment:
-
Originally posted by Victell View Post
. Would it help with trail braking in the wet?
The E5 is definitely better than the Mk60 E46 generation, and it's LEAGUES better than the original ABS.
One thing I didn't mention is that with Wilwoods all around the original ABS is too constrictive for the amount of flow I needed to move those pistons. Brake feel just sucked. The Mk60, between having independent rear lines and larger lines to the master cylinder(s) flows a ton more and feels perfect.
Leave a comment:
-
Originally posted by hoveringuy View Post...It will absolutely let you spin the car if you trail brake in the wet, it's not a magician.
Originally posted by hoveringuy View Post...Adding the steering angle gains some stability control. ... The full E90 SZL is required.
Leave a comment:
-
First track day of the season, it was cold and clear in the morning and then pissing rain and windy in the afternoon. In other words, a perfect day for testing!
I'm very pleased with the MK60E5 ABS. Last year, if I stood on the brakes at the end of the straight I got LOTS of tail waggle and yawing that required constant steering inputs. (I have the Massive Race kits all around with dual MC's..)
I got up to just short of 140 today and did the same thing, the car just hauls down with absolutely ZERO drama. I even demonstrated it to an instructor the next session out, I removed my hands from the wheel and the wheel didn't move a bit under hard braking. I could feel it intervening occasionally in trail braking but for the most part it's really unobtrusive.
What's interesting about this system is that the modulation is is analog, it's controlling brake pressure per corner in real time, not the on-off-on control that vibrates your pedal.
I didn't notice it quite as much in the rain, but probably because I wasn't as keen to explore the limits. It will absolutely let you spin the car if you trail brake in the wet, it's not a magician.
My next goal is a data logging dongle so I can go back and see what it was actually doing... (wheel speeds, brake pressures, yaw rate, acceleration, etc.)
Leave a comment:
-
You're seriously setting the bar for so many things my dude. Really cool how much tech can be retrofit into an E30 chassis.
- Likes 1
Leave a comment:
-
Originally posted by moatilliatta View PostLooks good, you can actually use wheel speeds to help hone in your brake balance while threshold breaking if you have a datalogger. Even an aim solo should be able to pick up the CAN.
Stainless lines looks nice. I reserved my LF area for Air induction real-estate.
Working on getting this going...
Leave a comment:
Leave a comment: