Announcement

Collapse
No announcement yet.

4x100 big brake kit thread

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    4x100 big brake kit thread

    Hello,

    Wanted to make this thread to see who is using what. Letís keep this thread specific to 4x100

    Please reply with kit information , caliper type, piston quantity and diameter , rotor diameter and thickness etc .

    Also it would be helpful to list what wheels are being used, with or without spacers? Size of the wheel and offset .

    Letís keep this thread as factual and informative as possible.

    Iíll try, today I printed massive lees 300x22mm kit template utilizing wilwood superlite calipers . I went ahead and checked clearance against TireRack Trm 15x8 e30 specific wheels , they clear for the most part but would need 3-5mm spacer to have clearance on the edges of the caliper against the wheel.

    Massive 300x32 kit will require even bigger spacer, probably 15mm to clear.
    Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205



    OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827

    #2
    a couple different variations available here: https://www.300mm.de/index.php?cPath...l8pqlnev7g4cs7
    cars beep boop

    Comment


      #3
      This one looks interesting , anyone know what they are doing for rotors ?

      https://www.300mm.de/product_info.php?products_id=153
      Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205



      OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827

      Comment


        #4
        I have 300x32 Massive floating rotors front and rear.
        6 piston radial mount wilwoods up front
        4 piston wilwoods in the rear.
        25mm e32 master cylinder 34311156643
        modified 944 booster
        Hawk DTC front rotors / Wilwood rears

        the front will fit 15x8's but the radial mount 6 pots are huge and you need a 20mm spacer for 15's and an 8mm spacer of the ARC-8's i"m running now.
        sigpic
        1991 318is S52
        1987 325i Vert
        1991 325i
        2011 e70 X5

        Need Anything E30? -> http://www.gutenparts.com/

        Comment


          #5
          I have IE's Wilwood kit, links included with all the specifics on the kit themselves.

          6 Pot front 4 Pot rear.
          310x22 front
          310x22 rear
          E90 Booster and Master
          http://www.iemotorsport.com/bmw/item/e30bbk310w.html
          http://www.iemotorsport.com/bmw/item/e30310Rm3.html

          I am running them under drilled and filled E38 Style 5's Et23, 225/45R16 no spacers they fit perfectly.



          Last edited by Staszek; 11-02-2018, 01:37 PM.
          Euro Delivery Thread///E30 Project Klaus

          Comment


            #6
            On my silver e30 going be using in front 296x25 rotor with mercedes caliper. For 300mm.de 294x22 rotor , adapter spacer and e36 m3 calipers.
            Projects Hartge,Alpina & AC Schnitzer Builds.http://www.r3vlimited.com/board/showthread.php?t=280601
            http://www.r3vlimited.com/board/showthread.php?t=227993
            http://www.r3vlimited.com/board/showthread.php?t=289362

            DSC04926 by Raul Salinas, on FlickrDSC03413 by Raul Salinas, on Flickr

            Comment


              #7
              I am running the massive 300x32 kit on all 4 corners, wilwood superlite calipers with AP rotors and PFC pads, 25mm MC, e21 booster. With some slight shaving of the caliper, Kosei K1s fit with no spacer, but I run a 3mm one. The old team dynamic pro race 2 wheels fit without shaving the calipers.

              NASA MidSouth TT Director / GTS2 #018
              Mods: Coastal PS Fluid, 10w40 Oil
              Future Mods: Bosch Micro-Edge Wiper Blades, Painter's Tape, Spark Plugs, Freezer for Nutty Buddys, Adam Nitti CD's

              Comment


                #8
                Originally posted by Skafrog View Post
                I am running the massive 300x32 kit on all 4 corners, wilwood superlite calipers with AP rotors and PFC pads, 25mm MC, e21 booster. With some slight shaving of the caliper, Kosei K1s fit with no spacer, but I run a 3mm one. The old team dynamic pro race 2 wheels fit without shaving the calipers.
                Very nice, this is pretty much exactly what I plan to run. I really think the Massive kits seem like the best quality BBK setups on the market. Awesome to hear that the K1s fit over this setup. 15s I assume? What width and offset? Are you running the radial mounted calipers?

                Comment


                  #9
                  Sorry, should have mentioned. Its the 15x7 K1s, ET25. I have an older kit with the 4 piston superlites (1.62" pistons) instead of the radial calipers.

                  NASA MidSouth TT Director / GTS2 #018
                  Mods: Coastal PS Fluid, 10w40 Oil
                  Future Mods: Bosch Micro-Edge Wiper Blades, Painter's Tape, Spark Plugs, Freezer for Nutty Buddys, Adam Nitti CD's

                  Comment


                    #10
                    That looks phenomenal. Are those canards something custom or are they something that is available off the shelf?

                    Are you using a manual brake setup? I'm planning to go with one of the Massive dual master manual setups and eventually the same front BBK.

                    Comment


                      #11
                      Originally posted by R3VM3UP View Post
                      That looks phenomenal. Are those canards something custom or are they something that is available off the shelf?

                      Are you using a manual brake setup? I'm planning to go with one of the Massive dual master manual setups and eventually the same front BBK.
                      They are custom, I made a few sets in case they got destroyed. I am running a 25mm MC with e21 booster. The brakes feel great IMHO.

                      NASA MidSouth TT Director / GTS2 #018
                      Mods: Coastal PS Fluid, 10w40 Oil
                      Future Mods: Bosch Micro-Edge Wiper Blades, Painter's Tape, Spark Plugs, Freezer for Nutty Buddys, Adam Nitti CD's

                      Comment


                        #12
                        Only thing I don't like about my RS003s; zero BBK fitment.
                        1989 325is Lachssilber - Sold
                        1990 325is Sterlingsilber - Current Project
                        September 2018 Car of the Month: Zeemz
                        Youtube Track & Autocross Videos


                        Comment


                          #13
                          Has anyone had fitment issues with the IE front kit? Like pistons on 1 side of the caliper, protruding further on one side than the other side? Or the floating rotor hitting the outer tie rod?

                          http://www.iemotorsport.com/bmw/item/e30bbk295.html
                          This set up, specifically.....?
                          @IRON-E30 aka Edwin:D

                          Comment


                            #14
                            Originally posted by Zeemz View Post
                            Only thing I don't like about my RS003s; zero BBK fitment.
                            Mine will fit, with spacers, I just didn't want mine spaced out so much:)
                            Euro Delivery Thread///E30 Project Klaus

                            Comment


                              #15
                              Originally posted by IRON-E View Post
                              Has anyone had fitment issues with the IE front kit? Like pistons on 1 side of the caliper, protruding further on one side than the other side? Or the floating rotor hitting the outer tie rod?

                              http://www.iemotorsport.com/bmw/item/e30bbk295.html
                              This set up, specifically.....?
                              Not sure about that kit, I have the 16", and I did have problems with it hitting the E36 tierods from my rack swap. Turns out the off brand that Rackdoc sent me was the issue.

                              I put a set of Lemforders on there and that cleared up the issue.
                              Euro Delivery Thread///E30 Project Klaus

                              Comment

                              Working...
                              X