SoCal General Chat

[ethrtyiS]

are you running it on a mech mod? I'll be running on a mech mod so I need to build something around -1.5ohm. Wont be running a kick so 3.7v

yep, mine is running at 1.6ohm. hits nicely, i'm going to drill the hole just a little bit bigger and try and get it to maybe 1ohm for the next one.

[E30_Pare]

coolio. ive been reading up for the aga-t2. 500 ss mesh with 30awg wire was giving 1.3ohm wrapped 4 times. Aiming for that setup

[ethrtyiS]

coolio. ive been reading up for the aga-t2. 500 ss mesh with 30awg wire was giving 1.3ohm wrapped 4 times. Aiming for that setup

right on, try a silica wick at least once. make sure you oxidize the whole thing or at least the part sticking above that gets burned and dip it in cold water, do it a few times to really clean it up too so you won't get that metallic taste. that's why i like silica wick or similar.

[MR 325]

I wish I knew what you guys were saying.

[E30_Pare]

right on, try a silica wick at least once. make sure you oxidize the whole thing or at least the part sticking above that gets burned and dip it in cold water, do it a few times to really clean it up too so you won't get that metallic taste. that's why i like silica wick or similar.

For sure I'll def try that out.

[IRON-E]

I wish I knew what you guys were saying.

Happy to know, I'm not the only non-cool guy up in hurrrr.

[einstein57]

I wish I knew what you guys were saying.

+1. I understand most of what you guys are saying from lab experiments but you loose me with mechanical mods and model names.

[MR 325]

Are you guys running a meth lab? If so I'm in.

[E30_Pare]

cliff notes

-rsst/aga-t2 = rebuildable atomizers
-igo-l/genesis = atomizer style
-ss mesh/silca wick = wick (carries ejuice)
-gauge wire wraps around wick between neg/pos post to vape ejuice

[einstein57]

My pipe is a carborizer which was supposed to be an upgrade over the atomizer according to some of the reviews I've read.

[mcr_driver]

Is this breaking bad talk? Which one of you is Jesse? Walt? Mike?

[E30_Pare]

My pipe is a carborizer which was supposed to be an upgrade over the atomizer according to some of the reviews I've read.

Its got a cartomizer with a tank. People like em more when on the go, but a lot of people say they tend to decrease in performance after a while. To much ejuice/flooding, etc. Dripping atomizers tend to give better flavor/vapor only downside is having to drip often because of no tank.

Where the rebuildables come in supposed to be the best of both worlds, biggest issue is leaking.

[einstein57]

70-30 blends are supposed to be ok

[E30_Pare]

i like a 30/70 pg/vg

pg- the flavor carrier & throat hit
vg- the vapor producer

so heavier pg you'll feel a stronger hit in the throat. Would probably cough until you get used to it. Personally I like heavy vapor & a mild throat hit, but I like playing with vapor. Depends on your flavors to.

To start out I'd go with a 50/50 & see which you like more of pg/vg

[einstein57]

50/50 is more prone for leaks