SoCal General Chat

[yert315]

awesome either way! it's always a nice feeling having completed something you can use for a specific purpose!



who the hell are you? some joker? you stole my money and never paid me back when i sold you my ltw's. i still have yet to see $600 of it...............
JKKKKKKKKKKKKK <3
he's a great lad, he comes by the wednesday meets frequently.

Sneaky sneaky Travis

[ethrtyiS]

Sneaky sneaky Travis

fuuuuuuuuuuuuuuu.
:hitler:

[dvck]

Theres a really cool e30 being sold for cheap guys.

http://www.r3vlimited.com/board/showthread.php?t=282222

[ethrtyiS]

dammit norwegians!

http://www.stanceworks.com/forums/showthread.php?t=18376

[thebutcher37]

Anyone have #13 (p/n: 51711953645)


That Bish fell off on the freeway.... I woulda picked it up, but my car is so low, it just crushed it as it went under the car. :(

[einstein57]

Racing Dynamics RGRs 16x8 et 33 $120. Saw a 15" set on an e30 in long beach and they looked really good. Should look awesome since they are 16". I'll powder coat the faces semi gloss black, silver, red, dark grey, yellow, white, grabber green, or any bonded color i have in stock for an additional $120.

[E30_Pare]

Dem tires r beefy.

[semaj4712]

Ill vouche for jason in retaliation for travis's troll, not because i really wanna vouche for him, but simple to retaliate at travises remarks

[JFarhanbod]

Hey Nigel I'll take those. Are the tires any good?

[MR 325]

To much 2.7i power

Dream on!

i take it no one has any pointers for the subframe? lol

It's not as bad as people say it is. Maybe you guys are doing something wrong? I've done a few of them on the ground in my shitty backyard.

Drop the full exhaust system, remove driveshaft, remove ebrake cables at the ebrake lever (do not remove at hub!), feed cables out of tubes, disconnect shocks and sway, disconnect inner brake lines (use brake line wrenches!), unbolt 2 allen bolts on each side, unbolt diff mount bolt, unplug diff sensor, remove two main nuts, and drop subframe.

I just position a floor jack under the diff and drop the whole thing that way. It does help to have a friend there to balance it as it drops off of the chassis studs. Sometimes you need slight help from a pry bar.

Minimum list of things I would replace while it's out: Subframe bushings, trailing arm bushings, diff mount, diff cover re-seal, inner and outer brake lines.

[ethrtyiS]

Ill vouche for jason in retaliation for travis's troll, not because i really wanna vouche for him, but simple to retaliate at travises remarks

it's travis'*.

[Herr Faust Schinken]

Dream on!


It's not as bad as people say it is. Maybe you guys are doing something wrong? I've done a few of them on the ground in my shitty backyard.

Drop the full exhaust system, remove driveshaft, remove ebrake cables at the ebrake lever (do not remove at hub!), feed cables out of tubes, disconnect shocks and sway, disconnect inner brake lines (use brake line wrenches!), unbolt 2 allen bolts on each side, unbolt diff mount bolt, unplug diff sensor, remove two main nuts, and drop subframe.

I just position a floor jack under the diff and drop the whole thing that way. It does help to have a friend there to balance it as it drops off of the chassis studs. Sometimes you need slight help from a pry bar.

Minimum list of things I would replace while it's out: Subframe bushings, trailing arm bushings, diff mount, diff cover re-seal, inner and outer brake lines.

yep i have all those including new E-brake and sway bar drop links, we are starting in about an hour and a half , luckily nothing looks rusty down there but i hope those aren't my famous last words lol , do have a pressure bleeder though so that should speed that process up

[MR 325]

Good luck and let me know if I can somehow help with questions.

[mcr_driver]

good luck !!

[QUKBMER]

Yo