SoCal General Chat

[E30_Pare]

I'm badly in need of a new windshield if anyone can point me to the right direction :(

pm'd

[CHIF8008]

is it possible to use a 325e's o2 sensor wire (engine compartment to underside of the car) with a 325i's sensor? i know the i's are a 4 prong and the e's are 2. could i just run another 2 wires within it? seems like it would work, but i dont know which wires need to be connected together from the harness -> to the sensor.

any help is appreciated.

[yert315]

just get an e34 o2 sensor

[TribalDreams]

Any guys in Escondido on here?

[mbonanni]

I'm kinda sorts close to esco

Sent from my SPH-L710 using Tapatalk 2

[viceversa]

I sorta kinda work close to escondildo

[mbonanni]

That makes us sorta kinda twinz

[CHIF8008]

just get an e34 o2 sensor

Im running an i harness. The problem is the wire, not the sensor. I have a new bosch plug, just looking for a way to make my e wire work

[mkcman17]

...why?

[yert315]

the e34 o2 sensor wiring is longer... and it has the correct 4-wires you need. Don't half-ass an already easy task.

[CHIF8008]

i would use an "i" wire if i had it, but its just kinda hard to justify driving all the way out to a yard for a dollar part. i plan on getting the right stuff when i have other things i need, but im in a pinch and need to get the car smog'd this weekend...so if i could make what i have work- it would be awesome.

or does anyone near hemet/riverside that has one i could get?

[bradthreee]

If the cables and mechanism are still intact...I'm pretty sure you can manually detach the cable system from the motor and turn and lock it down by a small allen key. All of this is located in the trunk right in the center.

I'll give it a shot, thanks bud

[E30_Pare]

some sweet e30 v 190 action. Cossy's ass is super loose. M3 putting on the pressure

[mcr_driver]

http://www.slrlounge.com/traditional-40s-pinup-photos-models-wearing-high-speed-milk

Fun with milk...

[einstein57]

Super loose ass on r3v?