SoCal General Chat

[IronmanE30]

Or you could spend 10$ and make one out of a bug sprayer!

Best idea yet and more fun to build it yourself. I like this idea because you can get a small bug sprayer and don't waste too much brake fluid. It has been said that pressure bleeders develop moisture so it's a good idea to clean and replace the brake fluid each time you use it unless you are working at a shop.

Cheers,

Jim

[IRON-E]

Sup everyone, how is it going?

[jp_slick]

Sup everyone, how is it going?

[einstein57]

Just wanted to give you guys a heads up on my coilovers. They care ready and I only have 21 sets left. Castro has quick feet. I probably won't have coilovers available after these are gone for a year.

[e30trooper]

Sup , have these kids on instagram trying to troll on me. lolz Not sure who they are but one is the kid who bought arys super body kitted e30 with dual exhaust. To many LOLZ

[MR 325]

Pressure bleeders, pft.

Get a friend to help you. I've never used a pressure bleeder in my life.

[QUKBMER]

Pressure bleeders, pft.

Get a friend to help you. I've never used a pressure bleeder in my life.

This ^^^...........And morning yal.

[E30 331is]

Anyone around the valley have a pressure bleeder? Bma is out.

I always used this(harbor freight) with a piece of flexible clear hose from OSH that fits exactly on the bleeder nipple. Work from the caliper up to push the air out of the system.

Watch this video, same concept I used when installing my slave.

http://youtu.be/wdf--suwqw0

[Balleristic31]

Any of you guys running mr2 struts up front? If so how did you press out the stock strut bearing?

[mbonanni]

Pressure bleeders, pft.

Get a friend to help you. I've never used a pressure bleeder in my life.

What's a friend, and where can I buy one?

[Ayman]

Pressure bleeders, pft.

Get a friend to help you. I've never used a pressure bleeder in my life.

Ugh you're such a man ;) that's what I wanted to do but I've been waiting for a week for anyone to help me. Tired of waiting at this point.

I always used this(harbor freight) with a piece of flexible clear hose from OSH that fits exactly on the bleeder nipple. Work from the caliper up to push the air out of the system.

Watch this video, same concept I used when installing my slave.
http://youtu.be/wdf--suwqw0

Thank you.

[Ayman]

What's a friend, and where can I buy one?

I've been pondering the same as of late.

[mcr_driver]

I've been pondering the same as of late.

I had to google it and it came back with no results found for me :(

[JFarhanbod]

I've been pondering the same as of late.

:(





What color should I paint my calipers on the 6?

[ethrtyiS]

don't paint.