Official SoCal PARTS For Sale Thread

[E30SPDFRK]

Since panjo refuses to let me post, I guess I'll list them here.

I have my old coilovers for sale, nothing wrong with them, I just upgraded. They're kind of modified Ground Controls, but really the only GC stuff left is the adjusters and camber plates. The shocks are Bilstein HD's from a 325ix that I sent back to Bilstein; the front shafts were shortened 1.5" and all 4 were revalved stiffer to match the new spring rates and the height I'd be running them at. The springs are Swift 5" 14k front and Hypercoil 4" 900lb/inch rears. The front strut housings have been shortened 2", have e30 M3 away bar mounts welded on, and have been reinforced where the spindle mounts to the tube. The camber places are Ground Control, as mentioned, and the rear shock mounts are old Turner Motorsport aluminum ones. They come with used but good front wheel bearings and brake backing plates.

These go very low, I have had them on my last 2 e30's, pictured below to show the range of adjustment. They are stiff, but because of the matched shocks they still ride very well.

Asking $1100, which is very fair considering the amount I've spent on them and the quality of similarly priced other kits. Shipping is on your dime.





















Located in Newport Beach

[KillaCam]

Still rocking the burnt ETA?

Ha damn that's a throw back, but yeah I still have it. I still have plans for it, I foresee its comeback soon, within the next few years.......just aslong as someone sells me a running eta engine

[marshallnoise]

I will take a close up for you. It's beat a bit, but it makes the car go left and right.

Here you go.

[2mAn]

That's a good deal

[MrBurgundy]

Here you go.

sweet, mine is in about the same condition, so I'll have to pass... Thanks though for the pics

[marshallnoise]

sweet, mine is in about the same condition, so I'll have to pass... Thanks though for the pics

You bet. It was just a test wheel for me. Wanted to see how I felt about the smaller wheel.

[MrBurgundy]

Random part request here, not for an e30. Does anyone have a face lift e46 passenger side bi xenon adaptive headlight?

[QUKBMER]

i have a sachs's clutch set (pressure plate/clutch disc/throw out bearing) i got for doing my s50 swap,well that did happen and i have alot of parts i will be selling. Back to the clutch set new in box part # w0133-1597959 it is actually for a 1991 bmw m5 . Looking to get $380.00 obo. Hit me up via text. 909-532-9173. Not looking to ship at this time,and if i do decide to ship is at buyers expense. My loss is you gain. Parts geek sells this same kit/same brand for $472.00. I paid $449.00 for this kit. So if you know someone that's doing a s50/s52 swap or has a 91 e34 m5 let them know i have it.

bump lower price

[IRON-E]

bump lower price

Terry, I got a new 310 number, I'll be hitting you up for that starter this week. Hopefully I can make it out there if you still got it.

[QUKBMER]

Terry, I got a new 310 number, I'll be hitting you up for that starter this week. Hopefully I can make it out there if you still got it.

Text me bro.

[///digitalme]

I have some stuff for sale
Drop hats e90, about 3k (10.00 dollars ) SOLD
miles on them comes with free strut mounts in good shape with same mileage
Also have a set of euro oem grills (55.00 dollars) SOLD
they were repaired by po but with a little respray they will look like new( currently theybare a little faded as expected, in good shape)

Ill add pics later or you can pm me

[2mAn]

Someone buy my strut housings!! $150obo

[freeride53]

Who in SoCal has a front plastic bumper for sale? Must be crack-free, and no warping.

PM me please! Thanks.

Sina

[viceversa]

Some random parts for sale:

M20 out of my 93 vert complete with accessories and wire harness, ecu, intake, etc... has no issues and has roughly 180k. Just pulled out a few weeks ago replaced by S52. Motor also has Getrag 260 5-speed attached but plan to sell separately as a 5-speed swap package.

M20: $400


5-speed swap (non-airbag): $800

Includes:
- getrag 260
- shifter linkage
- drive shaft
- clutch/ pressure plate
- flywheel
- clutch pedal
- clutch slave cylinder
- clutch master cylinder

Driveshaft: $250
Excellent condition driveshaft with guibo purchased new from driveshafts.com a couple years ago. Roughly 10 thousand miles on the drive shaft.


Exhaust: $200
Full e30 m20 exhaust with good (stock) cat never any issues passing smog.


Heat shielding for tunnel: $60


Accessory fan: $10


Stock oil cooler (no leaks): $50


Trailing arms: $80 (both)
Trailing arms with e-brake lines, complete with hubs with good bearings. Bushings replaced 4 years go, still in great shape. *The hard brake lines had to be cut on the arms for removal.


Rear Subframe (Diff not included): $100


Willing to trade my 3.73 LSD for your 3.25 LSD!!!

[e30style]

WTB: looking for a clean glovebox with latch, full lockset (ignition, 2 doors, trunk, glovebox) and a clean black trunk lid. Please pm me if you've got any of these items.