NOR-CAL General Chat.

Collapse
This is a sticky topic.
X
X
 
  • Time
  • Show
Clear All
new posts

  • Jean
    replied
    Looking for recommendations for body/sheet metal shop to widen fenders / rear quarters a couple of inches .

    Leave a comment:


  • Wanganstyle
    replied
    NOR-CAL General Chat.

    Originally posted by YosemiteSam
    Any of you guys know of any good tuners in the area? My build is almost done and I'm going to start looking for someone to tune the new engine. It's an extremely not stock M20 which will have ITB's and will be running on an AEM Infinity. I'd be willing to take the car pretty far for the right tuner.


    Hire Blacktrax

    Done.

    Originally posted by McGyver
    Anyone know of a local shop that rebuilds g265/6 transmissions?

    I have a transmission with a busted output shaft that may be of value as spare parts.


    Nobody plays with the g265 for good reason; it takes too long to tear apart and it’s an expensive parts list to build. I did one at great cost back before you worked at GAS; likelihood of anyone else doing it Bay Area will be very low.

    Your unit (post accident is scrap)

    G265 teardown and build with vintage period correct osgiken grpA DTM gear tree

    Leave a comment:


  • McGyver
    replied
    Originally posted by Cabriolet
    the trick to keep the cork ones from leaking is a light spear of RTV, loctiting the bolts and using the correct torque spec. i've only had 2 leak on me and one i installed wrong and the other was over tightening.
    This was my plan, but it's good to hear from someone that's had good luck.

    Leave a comment:


  • YosemiteSam
    replied
    I've become a fan of Hondabond. It just works.

    Leave a comment:


  • Cabriolet
    replied
    the trick to keep the cork ones from leaking is a light spear of RTV, loctiting the bolts and using the correct torque spec. i've only had 2 leak on me and one i installed wrong and the other was over tightening.

    Leave a comment:


  • McGyver
    replied
    Originally posted by freeride53
    ^ I lucked out with a MAHLE gasket at VatoZone in East Oakland the other weekend.
    Mahle is cork, right? (at least for m20 it seems to be cork)

    Leave a comment:


  • freeride53
    replied
    ^ I lucked out with a MAHLE gasket at VatoZone in East Oakland the other weekend.

    Leave a comment:


  • McGyver
    replied
    Anyone have a paper oil pan gasket hanging around or know of a local place to get one? I've never had luck with cork gaskets, and never had leaks with paper.

    Leave a comment:


  • surebimmer
    replied
    Check out turbo hoses in Livermore. They tuned my co workers supercharged s52 swapped e30.

    Sent from my SM-G955U using Tapatalk

    Leave a comment:


  • YosemiteSam
    replied
    Any of you guys know of any good tuners in the area? My build is almost done and I'm going to start looking for someone to tune the new engine. It's an extremely not stock M20 which will have ITB's and will be running on an AEM Infinity. I'd be willing to take the car pretty far for the right tuner.

    Leave a comment:


  • Bimmerman325i
    replied
    Originally posted by freeride53
    That’s rad! I am actually also rehabing my knee, which I got a pretty bad bone bruise on back in January (still kinda swollen/painful).

    I usually ride in the East Bay, but like to do SF, Marin and Peninsula when I can. My go-to ride is usually from my house in Alameda (by Oakland airport), up to the Oakland & Berkeley hills Skyline, and back.
    Knee injuries suuuuuuck.

    I'd be game to ride in a couple weeks. Gotta get some residual fitness and a bike rack for the SS first, but definitely am game!

    Leave a comment:


  • kronus
    replied
    Originally posted by McGyver
    Anyone know of a local shop that rebuilds g265/6 transmissions?

    I have a transmission with a busted output shaft that may be of value as spare parts.
    Pete’s gear shop in Hayward is the only one I’ve heard will even touch them in the area


    Originally posted by justinpirie
    Anyone need some 205/50r15’s? I have a perfectly usable pair of Direzza’s to give away.


    Sent from my iPhone using Tapatalk
    o hai I could use those. I do have a big pile of slightly toasted ex lemons tires as well though..

    Leave a comment:


  • McGyver
    replied
    Anyone know of a local shop that rebuilds g265/6 transmissions?

    I have a transmission with a busted output shaft that may be of value as spare parts.

    Leave a comment:


  • justinpirie
    replied
    Anyone need some 205/50r15’s? I have a perfectly usable pair of Direzza’s to give away.


    Sent from my iPhone using Tapatalk

    Leave a comment:


  • freeride53
    replied
    Originally posted by BlackbirdM3
    I'm always looking for someone to ride with, dirt or road. Not a ton of dirt to ride up here, but there is some good road riding. I will say I'm about as far out of shape as I get. (Haven't ridden yet this year, only got out for a dozen rides last year.)

    Will
    Originally posted by wworm
    lets go! planning on riding if my back allows it tomorrow.

    hell ya! bring your e30's and bikes. today's ride was a success (though a small one). we did the redwood regional park loop with a little bit of joaquin miller park in the oakland hills. weather was absolutely amazing.





    after the ride, cleaned up our family's mercedes and listed it for sale:



    Leave a comment:

Working...