NOR-CAL General Chat.

[canakami]

http://losangeles.craigslist.org/wst...759288545.html

Someone should go check out that speedster just for giggles :rofl:

That used to be a 73' Targa? :hitler:

Pour some out for das homie..

[mcr_driver]

It's definitely an "interesting" car...reminds me of this guy that did a chop top z3 here in socal. You can appreciate the work but at the same time you have to tell yourself...why?

[kronus]

Unless you request otherwise that thread is very fitment/flush oriented. What's the point of running cool wheels if you're going to wrap them in rubber bands? I'm sure 195s would fit with that low offset and 3+ degrees of camber, but it would look silly (obviously just my opinion, don't get butthurt stance folks), not to mention the roads around here suck, you'd bend the lips in short order with them waffleswaffleswaffleswaffleswaffles tires.

I'm having similar thoughts, function is much more preferable to fancy fitment. The wheels are sadly not redrillable...

[Cabriolet]

yeah I've got camber plates. need to re-verify the wheel measurements, but mystikal suggests 195s on the front, which is wimpy :(

eww 205 front and 235 rear

[oliver.r]

does anyone know how to contact facebook?

[kronus]

contact them for what purpose? (and there should be a contact page somewhere)

[canakami]

Drive to Palo Alto?

Then drive through the front doors?

[oliver.r]

they are not in palo alto, they are in menlo park

[oliver.r]

contact them for what purpose? (and there should be a contact page somewhere)

it wont let me set up the street address for the shop since there is a AAMCO down the street and it thinks were the same company

[Bimmerman325i]

Nope. ;)

:giggle::giggle::giggle:

[kronus]

anyone know local machine shops that work on wheels, like taking some material off the hub flanges?

[Wh33lhop]

anyone know local machine shops that work on wheels, like taking some material off the hub flanges?

I will do it for you with a grinder for a day of lift time

Also I'm gonna need a grinder

[kronus]

I will do it for you with a grinder for a day of lift time

Also I'm gonna need a grinder

you can help me swap the trans for a day of lift time ;)

anyway found these guys: http://www.yelp.com/biz/team-three-wheels-san-leandro

[Cabriolet]

you can help me swap the trans for a day of lift time

dont do it. that job sucks ass

[Wh33lhop]

you can help me swap the trans for a day of lift time ;)

This is possibility