For Gods Sake Michigan

[mybimr]

OK, bring your tools....the silver IS is waiting for a clutch job (throwout bearing shot), and the IX is on the operating table awaiting suspension parts (which I will be picking up this week)

my daughter drives her '91i to school so that won't be there, and I'll be driving the vert

Just kidding about the tools...

[Nsquared97]

where in GR? I have an e30 meet at my house every day!

Where in GR are you? I'm originally from Gandville, going to school in the UP. I'll be back in GR for Thanksgiving week.

[CrazyJew89]

Hey! that's my house (and e30 #4 of 5 for me)!!!

Add me to the map please...

I have an '89 is, '88 ix, '91 ic, '91 i (for my daughter), and the '88 is you see in this pic.

Gregg, the e30 pimp :pimp:

You are now on the map

[mybimr]

Where in GR are you? I'm originally from Gandville, going to school in the UP. I'll be back in GR for Thanksgiving week.

I'm on the northeast side. I'll be around next week. Am having a sh!tty time replacing the front struts on the ix right now...

[kesslerbmw]

I'm on the northeast side. I'll be around next week. Am having a sh!tty time replacing the front struts on the ix right now...

What are you having trouble with? I saw you have one of those Harbor Freight Ball Joint tool's, the ball joints are usually a PITA on those.

[dannyyisntt]

I'm on the northeast side. I'll be around next week. Am having a sh!tty time replacing the front struts on the ix right now...

I'd come give you a hand if you were closer

[CrazyJew89]

I'm on the northeast side. I'll be around next week. Am having a sh!tty time replacing the front struts on the ix right now...

I know how that goes. My biggest problem was the tie-rod end and the control arm. They did not want to budge. However, when I used the tie-rod end lifter that I picked up from NAPA properly the control arms ended up being a breeze. It only took a couple hours.

[mybimr]

Well, the project started as simply replacing the control arms and strut inserts....

I had picked up some decent used ca's on my last trip to Germany, and bought a pair of new Billy hd's...I thought I was good to go. But when I tore into it, I discovered all the ca nuts were rusted so bad, the impact tool simply spun them in place, and I had to cut them off. The strut inserts were also in poor shape, and the nut cutting forced me to replace the tie rods too. I now have a used set of struts and tie rods. I'm waiting to receive new wheel bearings and ca bushings to finish the job. It's been a bear of a job, but it will be worth it.

[pangeapiercing]

I'm in Ann Arbor- '90ic black on black- usually parked on Liberty street downtown. Never post or anything since I really don't have much to contribute, but have a big climate controlled warehouse and tools and am usually cool with people.

[CrazyJew89]

Doing my clutch tomorrow. Anyone want to help/lend me heated garage space? It's cold out there.

pangeapiercing, do you want me to add you to the map?

[b*saint]

How far am I from everyone seeing I live in BG. O and Im from Massachusetts so Im neutral in the whole Buckeyes MS debacle.

[CrazyJew89]

How far am I from everyone seeing I live in BG. O and Im from Massachusetts so Im neutral in the whole Buckeyes MS debacle.

Check out the MI E30 Map that I made and manage.

[jaysee]

wanna add me toi the list? i live in holland

[jaysee]

also i been seein a red mtech coupe on the southside by meijer alot, anyone know who that is? its one on the cleanest e30s iv ever seen

[CrazyJew89]

wanna add me toi the list? i live in holland

I can add you but, it's gonna be a few days before I can get to it.