widebodye30 aka EuroStop

[KDAWG97M3]

Bump...they sell junk and please stay away from Their parts...buyer beware.

[mbonder]

Mind showing us where you get oem flairs and carbon fiber body panels?

I wasn't talking about flares or body panels. The OP was talking about a wing with gurney flap, something that is a replication of an oem piece.

Which is why I said I'd rather pay $1k for the oem piece and know it's going to fit perfect than shell out $600 for something that I'm going to be frustrated about and then hate looking at every time I see the car.

[Beej '86 325es]

.5" gap down most of the driver's side and it bulges up. The passenger side isn't much better.
Without the evo hood seals I could see the engine plain as day. I've been doing E30 for 15 years now and I've spent 6 years building this one...It's the only thing on the whole car I'm not happy with.



Massive Brakes
Apex Wheels
I even remember UUC when all they did was innovate the short shifter...remember www.shortshifter.com? :)
etc. etc. I'd like to see more companies like this.

[qwerte]

DGM Fibrewerks strikes me as the type of business that would use a photo of your car in an ad without your knowledge or permission.

Ary then also throws salt into the wound by watermarking the pictures with his copyright signage. He has been called out on this practice a few times but never responds.

Someone should make an avatar similar to the "Just say no to Sportmax" for DTM Fiberwerks.

[Roysneon]

DGM Fibrewerks strikes me as the type of business that would use a photo of your car in an ad without your knowledge or permission.

That being said, does anyone know of a more reputable source for fender flares? I do not want ones meant for a 2002, however.

[Massimo]

well..i agree..i am 33, two kids and usually spend more on better parts...my wife was trying to be nice...which i greatly appreciate. Ary is done in the E30 M3 (not bc of me, i didnt mean it that way, just bc he has screwed so many people over there) world he has burned too many people over at s14.....oh well..he sucks and hopefully people will catch on...

S14.net is more of a mature crowed who usually spend more, and expect top quality, I would to if I had a E30 M3. But for the rest of us Ary's stuff is Ok its not great but it is not the worst.

[KDAWG97M3]

That's the problem with businesses that cater to a scene with a relavitely low age/income of the owners. They hand out shit to one guy, but 5 children with next to no cash are willing to step in and buy regardless of prior bad business practices or products. This guys business would have crumbled long ago had he tried to make parts for higher end vehicles.

well..i agree..i am 33, two kids and usually spend more on better parts...my wife was trying to be nice...which i greatly appreciate. Ary is done in the E30 M3 (not bc of me, i didnt mean it that way, just bc he has screwed so many people over there) world he has burned too many people over at s14.....oh well..he sucks and hopefully people will catch on...

[nando]

ftfy, even high end CF/fiberglass body panels don't fit 100%. They take a little bit of work to get perfect.

my MA Shaw CF hood fits perfectly, with 0 work. All the bodyshop did was prime and paint it. So that's BS.

the quality is plain shit, and it always has been, but kids will still eat it up. Don't kid yourself into think it's normal, especially when some things (like the fenders) cost more than OEM.

It's not exactly like E30 fenders are heavy, either. An E30 fender can't weigh more than 5lbs. what does a CF fender save? 1-2 lb? And that's not accounting for the fact that most of the parts are just fiberglass with a CF overlay and about 5lbs of gel coat. Does that seem worth the trouble of something that fits so poorly?

[cale]

That's the problem with businesses that cater to a scene with a relavitely low age/income of the owners. They hand out shit to one guy, but 5 children with next to no cash are willing to step in and buy regardless of prior bad business practices or products. This guys business would have crumbled long ago had he tried to make parts for higher end vehicles.

[ohthejosh]

Said perfectly..lesson learned...my issue p, is my wife bought this for me, she surprised me.never asked for it, Ary sold her..so I had zero input. She was trying to make Xmas even better.....

Good intentions gone bad. Should be lesson learned for zee wife. You need to be involved in purchasing surprise parts lol

Good luck man, there's been a wave of bad business practices going on lately.

[KDAWG97M3]

The way I see it is, if you are patient enough to save up 600 why not give it some extra time save up 400 more and buy a part thats is proven quality. I guess some folks are impatient.

Said perfectly..lesson learned...my issue p, is my wife bought this for me, she surprised me.never asked for it, Ary sold her..so I had zero input. She was trying to make Xmas even better.....

[KDAWG97M3]

I understand that some parts may/may not fit 100%. They are not oem. The main issue is that Ary chooses to take my money, and not allow a return or even lend help. He knows his pieces are junk, for me to have to cut my oem trunk (e30 m3) is nuts. I have learned over the last week that he has major fitment issues with most of his stuff. Check out s14, he is not welcome there...

You get what you pay for and I hope you guys stay away. But. As long as he sells cheap pieces, people will buy. It seems he has burned more people than helped, he needs quality control and new molds. 720.00 and zero customer service.

Beware of them...

[ohthejosh]

being precise takes more time and costs more money. massimo, you're not crazy. lol. it applies to every field, every aspect of life.

a dtm fiberwerks cf hood ($600) is not a VAC cf hood ($1000.) that's nearly double the price.

The way I see it is, if you are patient enough to save up 600 why not give it some extra time save up 400 more and buy a part thats is proven quality. I guess some folks are impatient.

[Kershaw]

being precise takes more time and costs more money. massimo, you're not crazy. lol. it applies to every field, every aspect of life.

a dtm fiberwerks cf hood ($600) is not a VAC cf hood ($1000.) that's nearly double the price.

[Massimo]

I disagree. Making a CF part fit as it should doesn't cost anymore $$ than making a CF part that doesn't fit.

I've made plenty of FG and CF parts. Once the mold is made every part coming out of it should be identical...and fit.

Then why are there so many FB and CF parts that do not fit? Not just Ary's stuff. If it is that easy then why are there so many bad kits.