True. I would just need to find those things within my price range...Which is low for a college student. haha. I'll see what I can do.
Announcement
Collapse
No announcement yet.
My m50 swap
Collapse
X
-
A little update
Originally posted by Wh33lhop View PostHm, we just pulled a friend's M20 with flywheel, starter and all, too. I think we scrapped the clutch and flywheel. :(
Trust me, I hear you on price. I'm graduating come Spring, and I'm doing the clutch when the trans is off of my M50 too.
So Sunday involved prepping my brake booster and painting it. It turned out very good actually. haha. It is now time to clean up the engine bay and fill unnecessary holes and hide wires and just make it look brand new and super clean. I'm gonna be painting the engine bay black, which in my opinion, looks really good with a grey, red, or white car. Hopefully will have some more pics up later.
Comment
-
A little update for today. I finished up the brake booster. Turned out pretty good. I pulled the tranny. I should have pulled the whole thing out as one unit. Stupid me. Not a big deal though. Super easy to take out. I need to pick up the e36 driveshaft and e32 master cylinder and reservoir this week. Today just involved me staring at my empty engine bay. haha. And wondering who I was gonna borrow a pressure washer from. I have one I can use now. More to come later.
Comment
-
Yo ahriley91, maybe I can swing by your place to see your progress as I will be trailing right behind you as I'm doing mine. I too, plan on painting my engine bay all flat black. I still need to discharge the a/c unit and I believe the previous owner installed the new r134a, I think thats the new stuff they use now that is more environmental friendly? Anyway, I need to pressure wash the bay too and then tape up the areas needed before the spraying starts.
So I'll source an ix booster and an e32 mc brake set up. For the engine mounts, what did you decide to go with? The e28 535i motor mounts that I believe, need spacer as oppose the the e28 M5 motor mounts that do not need spacers? I also believe that it's recommended that these mounts be welded to the crossmember to keep the engine from jarring forward to where the fan clutch won't blade into the radiator? Man so much little stuff to understand while doing the conversion. But will be all worth it when complete.
Comment
-
Originally posted by E30 Devil View PostYo ahriley91, maybe I can swing by your place to see your progress as I will be trailing right behind you as I'm doing mine. I too, plan on painting my engine bay all flat black. I still need to discharge the a/c unit and I believe the previous owner installed the new r134a, I think thats the new stuff they use now that is more environmental friendly? Anyway, I need to pressure wash the bay too and then tape up the areas needed before the spraying starts.
So I'll source an ix booster and an e32 mc brake set up. For the engine mounts, what did you decide to go with? The e28 535i motor mounts that I believe, need spacer as oppose the the e28 M5 motor mounts that do not need spacers? I also believe that it's recommended that these mounts be welded to the crossmember to keep the engine from jarring forward to where the fan clutch won't blade into the radiator? Man so much little stuff to understand while doing the conversion. But will be all worth it when complete.
Comment
-
Wiring!!
A little update. Tonight I tackled the wiring. I found a great diagram with pin and color matching. Worked like a charm. Took some picks of the process. And I am gonna be using the blower motor. I don't remember why I took the cover off. haha. On to the pics. Not very exciting pictures, but I know pictures are more entertaining then no pictures. haha
Last edited by ahriley91; 02-27-2010, 01:26 PM.
Comment
-
There is some really nice cable management out there that could look a little better than the E-tape.
Flexible sheathing
Big Heatshrink.Past Car : E30 S50 6 Speed 5 Lug 3.73
Current : Z3 S50 OBD2 (Smog Legal) 6 Speed BBS RN Dual Ear Diff
___________________________________________
BNB Designs
Engine Swaps, Fabrication, Innovation, General Repair
Richmond CA
Julian 848-248-8029
Comment
-
-
I feel super dumb right now. So now that I have the new wiring harness, how do I keep the battery in the trunk? Is there some more wiring that I need to do to do this? Any help is greatly appreciated.Last edited by ahriley91; 03-02-2010, 12:06 AM.
Comment
Comment