Originally posted by 02stu
View Post
Announcement
Collapse
No announcement yet.
Post your 40-70mph acceleration
Collapse
X
-
Originally posted by 02stu View PostI am kinda surprised that he can make it to 70 in 3rd though, I have ridden in 2 325is with 4.10s dropped in and they cut out before that.
I do agree this is not a very accurate way of measuring the time. But I'm confident its at least an under 5 second 40-70 car. I wonder about those G-tech meters?
Justinsigpic
Comment
-
Originally posted by 10/10ths View PostThat doesnt sound right. I didn't pay attention to the end revs, but theres definetly more to go after 70. I do have a 6900 limit, but then, wouldnt anyone else that has a 4.10 also have chipped there car? Most likely IMO.
I do agree this is not a very accurate way of measuring the time. But I'm confident its at least an under 5 second 40-70 car. I wonder about those G-tech meters?
Justin
Does any one have times for a e46 m3?
Comment
-
Originally posted by 02stu View PostThats a great link, the 60-80mph run could not be better suited for my gearing. At 80 I am just touching redline in 3rd. I did 4 or 5 pulls all under 4 seconds! Much of that time is to thank for the gearing though, it was also pretty cold outside, around 50 degrees or so.
Also remember a 4.11 does not produce a great 1/4 mile time because you have to shift more, during a 3rd gear run shifting doesn't come into play. I am kinda surprised that he can make it to 70 in 3rd though, I have ridden in 2 325is with 4.10s dropped in and they cut out before that.89 E30 325is Lachs Silber - currently M20B31, M20B33 in the works, stroked to the hilt...
new build thread http://www.r3vlimited.com/board/showthread.php?t=317505
Comment
-
Originally posted by 02stu View Post
Does any one have times for a e46 m3?
thats is based on a 3rd gear 2.9s 80-110km/h run (proper timing equipment as used by a local magazine) and then scaling it by 48/30 to make it 64-113km/h which is the same as 40-70mph. Obviously an assumption of linearity was made.89 E30 325is Lachs Silber - currently M20B31, M20B33 in the works, stroked to the hilt...
new build thread http://www.r3vlimited.com/board/showthread.php?t=317505
Comment
-
Originally posted by 02stu View PostI am kinda surprised that he can make it to 70 in 3rd though, I have ridden in 2 325is with 4.10s dropped in and they cut out before that.
Comment
-
It is a 4.10, I confirmed that before I installed it. I have only done a TOP speed run one time, it was 132mph on some skinny, overinflated tires. I remember pointing it out to my friend who was riding along that we were only at about 6500 rpm's. I have since squeezed out a bit more power so who knows now.
Here is a pic that was taken at the track yesterday, I had actually made it to 118-121mph each lap before heavy braking but I would need a longer straight to get top speed.
A good bit of revs left, so I dont think what I am telling you is too far off.
Justinsigpic
Comment
-
still...although i believe that you may benefit from longer gears mang. what are your times?No more e30s for me.
88 black BMW OBDII 332is dedicated track [sold]
88 BMW OBDII bronzit 332is [RIP 03/08]
91 BMW 325i [sold]
86 Corolla 'Ae86' HB 20v trd [sold]
http://youtube.com/watch?v=pTj7Hn9v5Rs
Comment
-
Originally posted by MIKe30 View Postand before 132 top speed with 500 rpms left iirc. that is the number that reallys sounds fishy to me. not saying you're flat out lying, but are you sure its a 4.10 under there?89 E30 325is Lachs Silber - currently M20B31, M20B33 in the works, stroked to the hilt...
new build thread http://www.r3vlimited.com/board/showthread.php?t=317505
Comment
-
My car weighs between 2500-2550
You can ALMOST see the 40-70 in this video clip at about 46-47 seconds in. http://www.youtube.com/watch?v=DPhIMhW5b80 (I forgot to remove my keyring)
Problem is:
1. I am coming out of a tight corner (tire scrub)
2. Its from 2nd gear
3. Shaky camera from bumpy ride!
I still need to get a r3v member for an official re-test.sigpic
Comment
Comment