Interest in a module to correct MPG gauge and OBC MPG?

[hoveringuy]

Ian,

I've got you covered. I can't do delivery confirmation out of the US but shipping is included anywhere.

Hi,

Does the $90 include shipping to the UK ?

If not, how much extra do you need ?

Cheers,

Ian.

[ian332isport]

Ian,

I've got you covered. I can't do delivery confirmation out of the US but shipping is included anywhere.

Payment sent :up:

[Flyin90iS]

Just ordered one. Thanks!

[Drew325is]

Update:

Steve sent me out a module to try on my M52B28-powered E30, running off Megasquirt II efi. Steve's module is listening to the GND side of one of the injectors (batch firing in 2 groups of 3, each batch firing twice per engine cycle). Steve slightly customised the software in the module on my car so that the pulse width is adjustable from -40% to +80%...I tried out the new software this morning and here are the results after a 160km drive (about 75% h'way, 10% urban, 10% mountain, 5% heavy traffic):

Real consumption 8.6L/100km (27.35 MPG)
OBC consumption 8.3L/100km (28.34 MPG)

I haven't even started fine tuning it. So over the next few weeks I'll work on dialling it in more (it's at about -10% atm, giving me plenty of adjustment to work with)...but this module is looking VERY promising for after market EFI systems!

Steve = WIN :D

[hoveringuy]

Standalone is working, I have more ready to ship. These seem to correct OBC issues on almost any German car. One was recently installed on a supercharged Boxter with great results.

[everlast]

Does this mean that you're taking orders for standalone modules?

[hoveringuy]

Standalone is the same, exact circuit configuration. The difference is in the chip's software to account for reading the injector signal directly instead of reading the signal from the ECU.

Thank Drew325is ^^ for the development feedback!

[Unearth078]

are these still available?

[daniel]

are these still available?

you should PM hoveringuy. i bought mine a few months ago and still havent installed it, haha.

[hoveringuy]

are these still available?

How many do you want?

[OrganicMechanic]

one here.

[StreuB1]

will need to buy one of these once the swap is done :D

[QuorumCAll]

I will be wanting one too, as soon as I can free up $90. I'm on a really tight budget, maybe a month.

[Dj_Frost]

I have finally gotten settled into my new house and had the time to assemble and program a batch of boards. So they are officially on sale and available!

You can expect to get very good accuracy out of your OBC and fuel econo-meter.

Boards are double-sided, fully solder-masked. Individually tested and will come with instructions. Installation entails clipping your fuel signal wire and inserting the ends into the terminal block, then connecting the power and ground wires.

Price is $90 shipped. Paypal hoveringuy@yahoo.com.

Sent paypal! When would this ship?

[Hartge H26]

do you have one that will work north of the border Litre / km