Announcement

Collapse
No announcement yet.

What would you have differently, knowing what you know now??

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    What would you have differently, knowing what you know now??

    So here's a question that will probably help a lot of us new swappers. For all of you guys that have done the M50/52 and s50/52 swaps-

    What would you have done differently. knowing what you know now?

    This can be anything, such as, different sequence taken when installing/removing things, different parts used, wished you would've replaced parts that later failed, etc!

    Let us know!

    #2
    +1

    1986 325es (69k) Garage Queen Buy It Now 10k;1986 325es (track rat) 2.7i How-To & 1.1/1.3Motronic UpGrade
    1991 318is (daily driver) 1991 318is M42 Maintenance How-To;1989 325i (parts car)

    Comment


      #3
      I wish I would have used a VANOS head to take advantage of the 6mm valve stems instead of the NV 7mm valves.
      That and gone turbo, whole lot more power potential for not much more power.
      My 2.9L Build!

      Originally posted by Ernest Hemingway
      There are only three sports: bullfighting, motor racing, and mountaineering; all the rest are merely games.

      Comment


        #4
        I wish I hadn't of procrastinated so much. I've been building this car for a couple years now, and just finally drove it on the street for the first time today.

        Erik

        Comment


          #5
          I wish I had bought a complete motor and tranny w/ wiring harness all together. Instead of piecing together everything. Would have been easier to buy a driveshaft and all the little parts but have the majority of work done.

          Comment


            #6
            Originally posted by 318isbmw View Post
            I wish I had bought a complete motor and tranny w/ wiring harness all together. Instead of piecing together everything. Would have been easier to buy a driveshaft and all the little parts but have the majority of work done.
            +1 for this. pieceing everything together sucks

            www.gutenparts.com
            One stop shopping for NEW, USED and EURO PARTS!

            Comment


              #7
              I wish I had EVERYTHING before I started the actual install. Too bad you can't tell exactly what you need or have all the money at once.

              Status: HG repair. 488wtq though!

              Comment


                #8
                I used an s50 when I had the opportunity to use an s52. But back then, OBDII was a problem.

                More recently, I did the whole Schrick cams, MAF, injectors, chip thing. I KNEW I had a slight lifter tick but was in a hurry for more power.

                Dang I'm an idiot. Now the lifter tick is driving me crazy so I get to do the cams/vanos all over again! Stupid!

                Comment


                  #9
                  I woulda bought a larger displacement motor then a m50tu.

                  Comment


                    #10
                    wish I had done an s54 right off the bat... Oh yeah and the A/c was a waste since I never use it
                    e30sport.net
                    '86 325es - s54b32tu - 6-speed - Mtech 1
                    '89 325is - m20b25 - 5-speed - Individual​
                    '06 M3 Competition - 6-speed
                    '19 Porsche GT3 RS - 7-speed PDK
                    '94 Lancia Delta HF Integrale EvoII - Giallo Ginestra
                    '97 Range Rover Vitesse

                    Comment


                      #11
                      has anyone done an s54 yet?

                      www.gutenparts.com
                      One stop shopping for NEW, USED and EURO PARTS!

                      Comment


                        #12
                        Not really anything I would have changed. Everything came out fine, and I have over 30k on the swap in the last year. I overbuilt and planned it out though, I am a little OCD and anal, so things rarely go wrong.
                        sigpic

                        Comment


                          #13
                          Originally posted by e30s52 View Post
                          has anyone done an s54 yet?
                          This is your front page. Click the ‘edit’ link to change the contents

                          Comment


                            #14
                            +2 on the buying of a complete motor.

                            Comment


                              #15
                              Awesome posts guys! Keep 'em coming!

                              Comment

                              Working...
                              X