Announcement

Collapse
No announcement yet.

Another S52 swap... but this time with a newb!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    I know. But I'm looking for cheaper/better alternatives than the SS replica's. These kind of look like the AA headers as the flanges look like it will mate to a AA track pipe (obd2).

    SINdelle:E36 M3 5-Lug | 17x8 & 17x9 BBS RS | S52/ZF | 2.93LSD/3.5HFM/24lb Injectors/C&S Chip[B]SOLD[B]

    Comment




      What are these wires? The stock e30 harness connects to them and on the harness the connect colors are black/white & violet/grey. Anyone know what these are?

      The connect displayed in the picture has the colored wires of black/red & black/violet. Can anyone chime in? I have no idea...

      SINdelle:E36 M3 5-Lug | 17x8 & 17x9 BBS RS | S52/ZF | 2.93LSD/3.5HFM/24lb Injectors/C&S Chip[B]SOLD[B]

      Comment


        Those are the wires you will tap into to run the fuel consumption gauge and speed input for the DME, if I'm not mistaken
        "A casual stroll through the lunatic asylum shows that faith alone does not prove anything."

        Friedrich Nietzsche

        Comment


          Fuel consumption gauge? The black/red wire is for the idle bump for the a/c button when its pushed that needs to be tapped into pin 63 of the 413 dme. Don't know where the "fuel consumption gauge" is suppose to be hooked up to.

          SINdelle:E36 M3 5-Lug | 17x8 & 17x9 BBS RS | S52/ZF | 2.93LSD/3.5HFM/24lb Injectors/C&S Chip[B]SOLD[B]

          Comment


            Originally posted by jahnaboi View Post
            Fuel consumption gauge? The black/red wire is for the idle bump for the a/c button when its pushed that needs to be tapped into pin 63 of the 413 dme. Don't know where the "fuel consumption gauge" is suppose to be hooked up to.
            Corrected. I had that connector confused with the one I use from the OBC for the road speed input and the fuel economy gauge
            "A casual stroll through the lunatic asylum shows that faith alone does not prove anything."

            Friedrich Nietzsche

            Comment


              Originally posted by jahnaboi View Post
              Fuel consumption gauge? The black/red wire is for the idle bump for the a/c button when its pushed that needs to be tapped into pin 63 of the 413 dme. Don't know where the "fuel consumption gauge" is suppose to be hooked up to.

              after the swap, will the fuel consumption gauge still work?

              Comment


                Originally posted by Mohammed_A View Post
                after the swap, will the fuel consumption gauge still work?
                won't be accurate.
                IG: deniso_nsi Leave me feedback here

                Comment


                  Originally posted by dude8383 View Post
                  won't be accurate.
                  So what do I hook it up to? Its a black/purple wire that I don't know what it hooks up to.

                  SINdelle:E36 M3 5-Lug | 17x8 & 17x9 BBS RS | S52/ZF | 2.93LSD/3.5HFM/24lb Injectors/C&S Chip[B]SOLD[B]

                  Comment


                    Originally posted by dude8383 View Post
                    won't be accurate.
                    It wont be a dead gauge though, and how accurate is a sweeping needle anyway?
                    "A casual stroll through the lunatic asylum shows that faith alone does not prove anything."

                    Friedrich Nietzsche

                    Comment


                      Seems rather accurate to me while driving. Oh well, useless stuff in my priorities. Lol.

                      SINdelle:E36 M3 5-Lug | 17x8 & 17x9 BBS RS | S52/ZF | 2.93LSD/3.5HFM/24lb Injectors/C&S Chip[B]SOLD[B]

                      Comment


                        Originally posted by jahnaboi View Post
                        I know. But I'm looking for cheaper/better alternatives than the SS replica's. These kind of look like the AA headers as the flanges look like it will mate to a AA track pipe (obd2).
                        Nothing will be cheaper, and they aren't proven to fail. Just buy them and be doen with it.
                        Check out Undr8d Empire on Facebook: www.facebook.com/Undr8dEmpireLlc

                        INSTAGRAM: @UNDR8D_EMPIRE

                        Scarlet V2 - #Project333Ti by @castromotorsport, @kingsautobodyshop, @bimmerheads, @hardmotorsport, @excel_motorsports & @mateomotorsports - http://www.r3vlimited.com/board/showthread.php?t=371356

                        Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

                        Comment


                          or you could get e36 cats/midpipes and e36 catback...you'll have to modify one of the exhaust pipes but its factory shit that won't fail..
                          IG: deniso_nsi Leave me feedback here

                          Comment


                            Is that what your running? What pipe needs to be modified?

                            SINdelle:E36 M3 5-Lug | 17x8 & 17x9 BBS RS | S52/ZF | 2.93LSD/3.5HFM/24lb Injectors/C&S Chip[B]SOLD[B]

                            Comment


                              how long did it take you to drop the rear subframe and replace the bushings?
                              Last edited by Naplm00; 01-02-2009, 10:38 AM.
                              88 325ic ~~~> Rusty and ugly
                              85 E ~~~> RIP

                              Comment


                                If I had my blow torch and didn't leave it 25 miles away the night I took it out I would have had it done in one night. Took two days one night for it to be completely back together.

                                SINdelle:E36 M3 5-Lug | 17x8 & 17x9 BBS RS | S52/ZF | 2.93LSD/3.5HFM/24lb Injectors/C&S Chip[B]SOLD[B]

                                Comment

                                Working...
                                X