Autocraft BMW Specialists = World of E30 M3 S54's **aka Heaven**

[evandael]

with that airbox, i wonder if you retained ABS or not? and if yes, is the pump in stock location?

[bimmertc]

with that airbox, i wonder if you retained ABS or not? and if yes, is the pump in stock location?

yes the abs unit is in there under the airbox with the air filter, i gotta figure out a new setup when the csl intake goes in

[pilotskillse30]

Not sure if you know but, I sent my M3 up there per your recommendations and the results I see here. AJ got the car yesterday I believe.

[bimmertc]

AJ got the car yesterday I believe.

yes we got the car Rubin, i'm loving the color there's 5 e30m s54 currently in the shop, on the finishing stages on two of them, one we had to rescue from another shop that did the swap n could"nt get it started, we got it running in 10min now the owner wants us to complete the swap n do our BBK kit, follow the progress on our facebook page https://www.facebook.com/AutocraftBMWSpecialists

[bimmertc]

took one of my s54 swaps to the dyno, still need a brush up tune we got 328.33whp n 269.51 ftlb, we went to the drag strip(e-town) last nite, the tach wasn't working so we had to shift without it, we did a mid 12's with a 1.8 60ft, gunning for the 11's i know what we need to do, car was on street tires 17's

[Gregs///M]

Wow, impressive everything. That interior is to die for. Also your dead tach might be SI board batteries.

[Slovik]

What kind of brake booster do you run?

[bubbajan21]

Bimmertc, can you elaborate a little on the brake setup and what it took to put the BMW Performance brakes on the E30 M3?

[bimmertc]

Wow, impressive everything. That interior is to die for.

Thanks, oem door cards with leather wrapped handle n pocket, sorry for the crappy pic, brake booster is from a 2002 tii, i'll post a pic tomorrow of what i did for the 1 series bbk

[bimmertc]

http://www.youtube.com/watch?v=0kNtR...m-upload_owner another one of our swaps

[bimmertc]

http://www.youtube.com/watch?v=3bJz3...m-upload_owner been a busy summer last yr, had a chance to play with the tune on the car, it now dyno's 337whp n 270ftlb torque, not sure how much more torque i can squeeze out, i know there's more hp to be made, the motor is 100% stock down to the intake manifold, the only mods r pullies, tune n custom exhaust

[Jb325is]

Any fitment issues with the kromer kraft headers? I'm thinking of buying a set for my swap

[bimmertc]

Any fitment issues with the kromer kraft headers? I'm thinking of buying a set for my swap

no issues at all, i've a couple sets coming in for customers, they make crazy torque n the sound to match

[allmotorguy]

Hey!
Amazing results as always guys!
Is it possible to fit kromer kraft headers on S50B32 euro or they work just on S54? :)

[bimmertc]

Hey!
Amazing results as always guys!
Is it possible to fit kromer kraft headers on S50B32 euro or they work just on S54? :)

thanks, they do have it for that application