Announcement

Collapse
No announcement yet.

Ix suspension

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    i say dont lower also ,my IX was purchased lowered on H&R's a billy HD's (looks harsh on the front axle angles) its ok a little harsh and im actually looking to go back to stock ride height or higher as nando states with coilovers (already have spare struts to start conversion) . the wife has already ripped the spoiler lip off twice and i would rather have ground clearance than performance as its my winter car if i want to drive a lowered car i have an E30M3 for that harsh ride quality......
    Angus
    88 E30M3 X2
    89 325IX
    92 R100GS/PD
    :)

    Comment


      #17
      What would everybody's recommendation for dropping just the front to get rid of the extra wheel gap? Do drop hats work in this situation or no?

      91 318i | 87 535iS

      Comment


        #18
        Taller tires front and rear helps with that.

        Ich gehöre nicht zur Baader-Meinhof Gruppe

        Originally posted by Top Gear
        Just imagine waking up and remembering you're Mexican.

        Every time you buy a car with DSC/ESC, Jesus kills a baby seal. With a kitten.


        Comment


          #19
          Originally posted by ScHpAnKy View Post
          What would everybody's recommendation for dropping just the front to get rid of the extra wheel gap? Do drop hats work in this situation or no?
          you can't use drop hats on an ix. it's an awful idea anyway.
          Build thread

          Bimmerlabs

          Comment


            #20
            Originally posted by nando View Post
            you can't use drop hats on an ix. it's an awful idea anyway.
            any other solution? Can I run a stiffer but shorter front spring? Also, what's the difference in height between stock e30 springs and iX springs as I have eibachs and IE3 rear springs if I can get away with it.

            91 318i | 87 535iS

            Comment


              #21
              I'm going with the ground control set up, i seen they are selling just the adjustable springs alone for &400 and there IX specific.
              Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

              IX being restored here

              Ix turbo build here

              Comment


                #22
                Originally posted by ScHpAnKy View Post
                any other solution? Can I run a stiffer but shorter front spring? Also, what's the difference in height between stock e30 springs and iX springs as I have eibachs and IE3 rear springs if I can get away with it.
                it's not about height difference. the rates are all wrong. regular E30 drop in springs are going to be way too short, in addition to being too soft to begin with (even for a regular E30). H&R sports for the ix (which are really just H&R OE sports) are already too soft/short, with other drop in springs you'll literally be riding on the bumpstops. not good.

                The only viable solutions:
                STOCK with quality inserts (it really handles quite well if everything is fresh)
                ix "specific" drop in springs (H&R Sports) with shortened bumpstops
                coilovers with stiff rates/shortened housings (contact GC)

                another option is to cut a couple coils off the stock springs.

                anything else is going to severely compromise ride quality and handling, due to travel issues. There's just not much to work with on an ix so you need to be careful how you set it up.
                Build thread

                Bimmerlabs

                Comment

                Working...
                X