E34 525ix info

[nando]

they are close but they look about 2" too far forward.

a guy on E30tech brought up a good point - you could make your own mount "towers", which are the brackets that bolt to the subframe, which sandwich the mounts to the mount arms themselves. you could make them so the center hole was 2" further forward and then RWD E34 mount arms would work.

I don't know what other people have used - custom?

another thought would be highly modified E30 ix mount arms but I think they get in the way of headers.

[Nisse Järnet]

nevermind - I got pics of it. I'll repost them later, but they will not work at all with the E30 ix front subframe. :(

OK, do you know if the best option is e34 m50 rwd mounts? Besides making your own :) I will start mocking things up in the car in september-october i hope.

[nando]

nevermind - I got pics of it. I'll repost them later, but they will not work at all with the E30 ix front subframe. :(

[Nisse Järnet]

do you have the motor mount arms/brackets?

No not at the moment, but i can get them :)

[DC2NoVA]

that forum has gone down the tubes. :(

what a shame, so much great info on there

[nando]

do you have the motor mount arms/brackets?

[flyboyx]

that forum has gone down the tubes. :(

[Teknik22]

i never got approved either

[DC2NoVA]

I read alot on E30tech and tried to register but i never get approved..

same here :(

[Nisse Järnet]

I read alot on E30tech and tried to register but i never get approved..
Anyway i found alot of interesting info there thanks to sharing members, so i have a bunch of E34 525ix parts if anyone wants info, measurments etc. i have all the drive train parts x 2 :)