Looking to purchase a 1988 325ix 5 speed with 254,000 miles. The current owner has replaced quite a bit of parts and has receipts to show for it as well as some as the P.O. before him. The car seems pretty clean for being in NY. The only problem with the car is it stalls out after warming up. The owner said he replaced the fuel pump before it started actIng up. The Stomp test produces the code 1211. ( dme control unit fault ) so I’m wondering if a couple hundred $$ in sensors and a 173 pin dme with the 1k resistor or even just another 153 pin dme would get it up and running again or if it’s not worth the headache. Guy seems to know his stuff and not just trying to dump off on someonelse as he first stated he wouldn’t sell until he fixed the stalling issue. Any info would be greatly appreciated.
Announcement
Collapse
No announcement yet.
Looking to buy 88 325ix
Collapse
X
-
Hey spoke with this guy regarding any leftover ix parts a few months ago. Its been on the FingerLakes craigslist for some time now. About 10 months ago he was asking the same price for it with a burnt out viscous coupling. He told me that he rebuilt the transfer case himself and it is apparently in good working order.
I think I may have a spare MAF if you are interested.1989 325ix
1992 325ic 770A
2002 M3
Comment
-
Neither of these parts are unique to the IX, so post a "Wanted" ad in the Classified section and/or watch for a part out of a wrecked car that was running at the time.
You need to have a "173" DME or higher for better test capabilities. Like Nando said, get a stock one (not a chipped one) for now until you can get the engine running correctly.
So you have a check engine light on, and your a backyard mechanic. One of the most useful free tools in your arsenal is what is called the stomp test; this test basically makes the check engine light flash to give you a code, with this code you can determine the fault for why the
For the air flow meter (AFM), make sure you're getting a M20B25 "i" version, not the M20B27 "eta" version.
Stalling when warm could be caused by a number of other issues as well, but convert back to the factory components first and go from there.101
The E30 collection:
1987 325es M52 - Schwarz / Taurus Red Sport (son #2's)
1987 325is - Delphin / Black Sport (son #3's)
1987 325i Convertible - Triple Black
1989 325iX Coupe - Diamondschwarz / Black Comfort
1990 325iX Coupe - Sterling Silver / Grey Sport
1981 Fiat 124 Spider 2000 - Green / Tan
1998 Volvo V70 GLT - White / Tan
1998 Volvo S70 T5 manual - White / Taupe
2001 Ford Windstar - Silver / Grey (parts hauler)
2006 Lexus GX470 - White / Tan (tow rig)
Comment
-
Neither of these parts are unique to the IX, so post a "Wanted" ad in the Classified section and/or watch for a part out of a wrecked car that was running at the time.
You need to have a "173" DME or higher for better test capabilities. Like Nando said, get a stock one (not a chipped one) for now until you can get the engine running correctly.
So you have a check engine light on, and your a backyard mechanic. One of the most useful free tools in your arsenal is what is called the stomp test; this test basically makes the check engine light flash to give you a code, with this code you can determine the fault for why the
For the air flow meter (AFM), make sure you're getting a M20B25 "i" version, not the M20B27 "eta" version.
Stalling when warm could be caused by a number of other issues as well, but convert back to the factory components first and go from there.101
The E30 collection:
1987 325es M52 - Schwarz / Taurus Red Sport (son #2's)
1987 325is - Delphin / Black Sport (son #3's)
1987 325i Convertible - Triple Black
1989 325iX Coupe - Diamondschwarz / Black Comfort
1990 325iX Coupe - Sterling Silver / Grey Sport
1981 Fiat 124 Spider 2000 - Green / Tan
1998 Volvo V70 GLT - White / Tan
1998 Volvo S70 T5 manual - White / Taupe
2001 Ford Windstar - Silver / Grey (parts hauler)
2006 Lexus GX470 - White / Tan (tow rig)
Comment
-
I should find out exactly what dme is in the car, and would it need to be specific for a manual? I’ve read the articles about the 173 with the 1k resistor. I’ve found some forsale on Parts Geek and Bavarian Auto Sports but am not sure with all the mixed reviews. He also said he has another maf from another car.Last edited by Adrappo; 03-08-2018, 02:08 PM.
Comment
Comment