Post your modified/ aftermarket gauge clusters.

[Staszek]

Don't mind telling us how much did the setup run you? Including the Volt metrr snd oil temp. Thinking about refurbishing my cluster as well. Thanks

Sent from my SM-N910V using Tapatalk

It depends on what you want done, they are pretty ala cart. Their prices are all on their site. Mine was I think about $500+ but that included a full refurb (which is $320 base) that gives you glass polished, completely re-soldered board, new lights, batteries, new gears, repainted plastics etc. Then I added rings, painted needles, alpina strip, raised the tach and added volt and oil temp sensor, those are what drove up my price.

You can basically get a complete refurb and gauge rings done for under $400 if you want the basics.

[nando]

I haven't actually finished it.. still needs some internal wiring. One day I'll be motivated again:



has a built in digital oil pressure gage and wideband. I haven't powered it on since 2013, so hopefully it still works.. lol. I made the clear lens myself. :)

[Staszek]

I haven't actually finished it.. still needs some internal wiring. One day I'll be motivated again:



has a built in digital oil pressure gage and wideband. I haven't powered it on since 2013, so hopefully it still works.. lol. I made the clear lens myself. :)

If you get that to work I am selling mine and buying your lol!! I would have loved to have done that but I do not have the skills.

[nando]

yeah I don't think I could build another one. Honestly, I don't remember how I did half of it. Fortunately I was pretty detailed on my wiring documents so I should be able to figure that out. My fear is I'll put it in my car and nothing will work.. also, it requires CAN to run most of the gages.

[stonea]

I was always curious to what happened to your cluster project. Looks good!

Sent from my SM-G920V using Tapatalk

[Staszek]

yeah I don't think I could build another one. Honestly, I don't remember how I did half of it. Fortunately I was pretty detailed on my wiring documents so I should be able to figure that out. My fear is I'll put it in my car and nothing will work.. also, it requires CAN to run most of the gages.

Im putting an S54 in but I wont be running CAN lol

[nando]

if you are running MSS54 it's only 2 wires.

[Staszek]

if you are running MSS54 it's only 2 wires.

I will be, maybe thats something down the road. I am not the best with wiring and it took me forever to figure out what the guy did when he cut all my other wires.

So much project to do, so little done.

[faujijatt]

It depends on what you want done, they are pretty ala cart. Their prices are all on their site. Mine was I think about $500+ but that included a full refurb (which is $320 base) that gives you glass polished, completely re-soldered board, new lights, batteries, new gears, repainted plastics etc. Then I added rings, painted needles, alpina strip, raised the tach and added volt and oil temp sensor, those are what drove up my price.

You can basically get a complete refurb and gauge rings done for under $400 if you want the basics.

thanks for the info,bro. Will check them out. ;-)

Sent from my SM-N910V using Tapatalk

[faujijatt]

I haven't actually finished it.. still needs some internal wiring. One day I'll be motivated again:



has a built in digital oil pressure gage and wideband. I haven't powered it on since 2013, so hopefully it still works.. lol. I made the clear lens myself. :)

Thats friggin sweet.

Sent from my SM-N910V using Tapatalk