Hello r3v. I have an M3 cluster with the stock oil temp gauge. I am collecting date from the canbus (s54 swap) for logging and display on a custom Alpina style digital gauge and I figured since I had access to the oil temp canbus data it didnt make sense to install another oil temp sender on the engine.
I know people have converted the econometer into boost gauges and stuff like that. What method of control was used for the gauge. Is 10bit PWMing a mosfet on the sensor line enough to drive this? I didnt want to reinvent the wheel since I know people are already doing this.
I know people have converted the econometer into boost gauges and stuff like that. What method of control was used for the gauge. Is 10bit PWMing a mosfet on the sensor line enough to drive this? I didnt want to reinvent the wheel since I know people are already doing this.
Comment