Upgrading to Parallel Flow Condenser

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bmwstephen
    R3VLimited
    • May 2009
    • 2463

    #106
    Originally posted by glucklich21
    Yup the E30 system just can't handle it. It honestly needs a larger condenser to get past it.
    compressor, condenser, and fan. this applies to r12 too i think. I was pretty much comparing the temperatures too the pdf on your thread about nominal values and it's pretty consistent between r12 and r134a. I guess bmw didn't take AC seriously until after the e30 since the cars before then had jokes of a system
    Last edited by bmwstephen; 07-08-2012, 06:17 PM.

    Comment

    • bmwstephen
      R3VLimited
      • May 2009
      • 2463

      #107
      don't mean to thread jack but can anyone show me or take a pic on how to jumper the aux fan to run at high speed?

      Comment

      • cabriodster87
        E30 Enthusiast
        • Jan 2011
        • 1042

        #108
        comp# 64521377946

        i've a Bosch compressor that is listed on this non compatibility chart. has anyone had issues with this? there is nothing wrong with my current compressor.

        AC repair, 12/86 325iC: in progress

        I can get a 4seasons #57400 reman for $200.00
        sigpic
        Reich und Roll!

        Comment

        • bigdrick323
          Mod Crazy
          • Feb 2012
          • 616

          #109
          Trying to find a condenser and potentially a fan. Need to replace my condenser and figured I'd upgrade and convert while I am at it. Where can I get both and which specific ones should I get?
          sigpicMy Project!

          Official North Texas Bimmers Club E30 Representative

          www.BimmerAlliance.net

          "If you have questions about events or need help in the DFW area don't be afraid to contact me."

          Comment

          • glucklich21
            E30 Mastermind
            • Apr 2010
            • 1912

            #110
            See this:

            Comment

            • Vtec?lol
              No R3VLimiter
              • Dec 2009
              • 3278

              #111
              Originally posted by bigdrick323
              Trying to find a condenser and potentially a fan. Need to replace my condenser and figured I'd upgrade and convert while I am at it. Where can I get both and which specific ones should I get?
              I have a brand new Spal 16" Puller fan here in dallas if you'd like to convert.

              Comment

              • bigdrick323
                Mod Crazy
                • Feb 2012
                • 616

                #112
                How much

                Sent from my LG-MS870 using Tapatalk 2
                sigpicMy Project!

                Official North Texas Bimmers Club E30 Representative

                www.BimmerAlliance.net

                "If you have questions about events or need help in the DFW area don't be afraid to contact me."

                Comment

                • Vtec?lol
                  No R3VLimiter
                  • Dec 2009
                  • 3278

                  #113
                  Originally posted by bigdrick323
                  How much

                  Sent from my LG-MS870 using Tapatalk 2
                  Well, it was $85 shipped. All I did was open the box. Never installed or used sooooo, $65 maybe?

                  Comment

                  • bigdrick323
                    Mod Crazy
                    • Feb 2012
                    • 616

                    #114
                    Originally posted by Vtec?lol
                    Well, it was $85 shipped. All I did was open the box. Never installed or used sooooo, $65 maybe?
                    See PM.
                    sigpicMy Project!

                    Official North Texas Bimmers Club E30 Representative

                    www.BimmerAlliance.net

                    "If you have questions about events or need help in the DFW area don't be afraid to contact me."

                    Comment

                    • nrubenstein
                      No R3VLimiter
                      • Feb 2009
                      • 3148

                      #115
                      Originally posted by bmwstephen
                      man after driving around the peninsula, north, east, and south bay to test out my AC system, I noticed the biggest factor affecting the efficiency of a system is humidity. Could not believe that a dry city like Sacramento would yield better results as much as 10 degrees than places closer to water like Fremont/San Jose under the same temperatures.
                      Recirc is your friend when it is humid. The problem is at least as much, if not more so on the evaporator end. Running recirc dries out the air in the car pretty quickly and gives you decent performance under almost all conditions.
                      2006 GMC Sierra 2500HD 4WD LBZ/Allison
                      2002 BMW M3 Alpinweiß/Black
                      1999 323i GTS2 Alpinweiß
                      1995 M3 Dakargelb/Black
                      - S50B32/S6S420G/3.91
                      1990 325is Brilliantrot/Tan
                      1989 M3 Alpinweiß/Black

                      Hers: 1996 Porsche 911 Turbo Black/Black
                      Hers: 1988 325iX Coupe Diamantschwartz/Black 5spd

                      sigpic

                      Comment

                      • bigdrick323
                        Mod Crazy
                        • Feb 2012
                        • 616

                        #116
                        Here's what I picked up and what I'm working on right now.
                        Attached Files
                        sigpicMy Project!

                        Official North Texas Bimmers Club E30 Representative

                        www.BimmerAlliance.net

                        "If you have questions about events or need help in the DFW area don't be afraid to contact me."

                        Comment

                        • jeffnhiscars
                          R3V OG
                          • Jun 2011
                          • 6010

                          #117
                          Originally posted by bigdrick323
                          Here's what I picked up and what I'm working on right now.
                          That appears to be a serpentine condensor
                          Seat Shocks....I have passed the baton to John Christy from Ninestitch. Email John or Garrett at ninestitch1@gmail.com

                          https://www.r3vlimited.com/board/sho...86#post4944786
                          Alice the Time Capsule
                          http://www.r3vlimited.com/board/showthread.php?t=360504
                          87 Zinno Cabrio barn find 98k and still smells like a barn. Build thread http://www.r3vlimited.com/board/show...20#post3455220

                          Comment

                          • bigdrick323
                            Mod Crazy
                            • Feb 2012
                            • 616

                            #118
                            yeah, I asked for parallel flow, but they f'd me, what ya gonna do. It's not worth the effort to send it back and have them send a new one out. I picked up the 16" pull fan from Matt, so now need to get everything back in there. How do I get the 16" fan into the place where the 14" fan used to be???
                            sigpicMy Project!

                            Official North Texas Bimmers Club E30 Representative

                            www.BimmerAlliance.net

                            "If you have questions about events or need help in the DFW area don't be afraid to contact me."

                            Comment

                            • GoldMember
                              Noobie
                              • Oct 2014
                              • 36

                              #119
                              Originally posted by bigdrick323
                              Trying to find a condenser and potentially a fan. Need to replace my condenser and figured I'd upgrade and convert while I am at it. Where can I get both and which specific ones should I get?
                              Is it necessary to upgrade the fan when doing a conversion to parallel flow? How big a difference does it make?

                              Comment

                              Working...