How To Guide - E36 Steering Rack Swap

[Jacksontheogre]

i have been able to find every part but the low pressure line anyone have a part number or a link?

[Landrunner]

Just put mine in today, does the same thing as well and seems like they make the racks a tad tight when they rebuild them. I'll give it a few weeks for it to break in and see if it helps at all.

Cool, glad I'm not the only one to experience this. I figured that with all new steering components it'd be a tad tight, after visually inspecting the u joint, it's straight as an arrow and moving freely do the mild lack of return action must be due to the freshly rebuilt rack. Keep us posted!

[Aahj]

Just put mine in today, does the same thing as well and seems like they make the racks a tad tight when they rebuild them. I'll give it a few weeks for it to break in and see if it helps at all.

[Landrunner]

Just had this done, what a difference! I did a new steering yoke, refurbished e36 rack, new steering pump, all new lines, and a new reservoir. It takes a tiny bit of driver input to get the steering wheel to center after a light turn, nothing crazy. Is this normal?

[ToPLeSS(e30)FeinD]

Just a quick question though. As I've never done this myself before, to take out the inner tie rods you can simply use vise grips and they just pop off? I'm replacing mine but I didn't know if this method was correct or not. Seems a bit brute.