Miller W.A.R. Machine

[LowR3V'in]

brody, non of your pictures are working for me. :x

Can you share how much vacuum you were seeing before and after all
the intake stuff?

[325ix]

sounds great!

[brody]

Here is a quick video we shot this morning to let you hear how it sounds with the Miller M20 Induction kit installed. Video doesn't do it justice though...

[markhchambers]

It sure is sharp looking.

[brody]

I don't see the exhaust on your website?

You are right, it's not listed. Our signature exhaust is only available in house right now as they are expensive and hand made to order from sanitary stainless. If we jig up to manufacture it, price would only come down slightly.

[markhchambers]

I don't see the exhaust on your website?

[brody]

What kind of gains could you expect from a M50nv with 19lbs injectors, supersprint headers and a single 2.5in with high flow cat, after adding a WAR chip?

Our base tune for a stock, non vanos engine produces 18 - 20 whp and the same increase in torque. This is on a manual transmission too. With the WAR Chip, you would start with that software and have some power on the table. With a simple massage of the base tune you would unlock probably 5 or 10 more hp.

[SamE30e]

What kind of gains could you expect from a M50nv with 19lbs injectors, supersprint headers and a single 2.5in with high flow cat, after adding a WAR chip?

[NC325iC]

LOL! Mr. Brian, I remember our conversation! Dan has been improving a lot lately. We both have our areas of focus for the business and he admits 90% of the time his mind just isn't "there" for customer service.

sounds like an engineer :)

[briansjacobs]

LOL! Mr. Brian, I remember our conversation! Dan has been improving a lot lately. We both have our areas of focus for the business and he admits 90% of the time his mind just isn't "there" for customer service.

I appreciate your honesty in your post and thank you for it!:-D

Anytime, you will find I am generally fair and unbiased. Remember the number one reason you are in business is to sell products. Alot of people of high inteligence (I will give Dan the benefit of the doubt here as I know the quality of the products) have piss poor social skills. The key is put him back in a room and let him be a mad scientist and do what he does best, you deal with the costumers and reallze that he needs you and you need him. Unless you can do what he does that start Brody performance!

When I talked to him on the phone and he was in tech geek mode he was awesome about the best I have spoken too anywhere, in customer service mode, well I almost told him to put his MAF up his ass!

[brody]

I can vouch for the miller products, I am using the war chip and MAF. Where I have been vocal in the past about despising Dan Miller, everything Brody has told me over the phone has been nothing less than 100% accurate. Even Dan was great with problem solving and tech support. I am unbiased and tend to give credit where credit is due, I would not hesitate to buy a Miller performance product, just make sure to deal with Brody when you do!

my problem with Dan stems from his additude, lack of customer service skills and failure to stand behind a failed product. (failures are perfectly acceptable as no business has a 100% success rate) However I think when working properly the product is so good I do not mind the additional expense incurred, it was just the fuck attitude by Dan. Brody is awesome and a true asset to the BMW community and as much as I hate to so it, Dan is an asset as well (so long as he does not speak)

LOL! Mr. Brian, I remember our conversation! Dan has been improving a lot lately. We both have our areas of focus for the business and he admits 90% of the time his mind just isn't "there" for customer service.

I appreciate your honesty in your post and thank you for it!:-D

Any plots showing what the induction kit by itself does?

Got some independant tests as well?

We don't have a before and after comparison of BONE stock just yet. The next best thing I can do is show the before and after Induction kit as the car sits now.

Before: Standard 2.7" GENiii MAF, Miller Smart Fan, 2.5" Free Flow Exhaust
After: Prostreet Induction Kit with integrated GENiiiM/Race MAF, Miller Smart Fan, M30 Throttle Body, 2.5" Free Flow Exhaust

[briansjacobs]

Any plots showing what the induction kit by itself does?

Got some independant tests as well?

I can vouch for the miller products, I am using the war chip and MAF. Where I have been vocal in the past about despising Dan Miller, everything Brody has told me over the phone has been nothing less than 100% accurate. Even Dan was great with problem solving and tech support. I am unbiased and tend to give credit where credit is due, I would not hesitate to buy a Miller performance product, just make sure to deal with Brody when you do!

my problem with Dan stems from his additude, lack of customer service skills and failure to stand behind a failed product. (failures are perfectly acceptable as no business has a 100% success rate) However I think when working properly the product is so good I do not mind the additional expense incurred, it was just the fuck attitude by Dan. Brody is awesome and a true asset to the BMW community and as much as I hate to so it, Dan is an asset as well (so long as he does not speak)

[digger]

We will have pictures shortly, but what started as just a testing piece has now become a product! The W.A.R. Machine has now been fitted with our upcoming Miller ProStreet Induction Kit!

We are making awesome power with an internally bone stock M20 now! As you can read in the thread, we are busy tinkering with ideas on the M20 to see what works.

Our new ProStreet M20 Induction Kit is a 3" intake with our GENiiiM/Race MAF sensor built right into it. The Intake is routed down in behind the fog light to a cone filter far away from the heat of the rad, and exposed to some nice cool air. This Intake also incorporates stock ICV placement. A further benefit is the light weight aluminum construction saves you a tone of weight compared to stock.

Look at these gains! It is like putting on our MAF all over again! This is Stock vs. our MAF vs. M20 Induction kit with Miller smart fan and HFE.



I will have to get the difference between all the mods mentioned above less the M20 Induction kit too. I will also get some videos because this little car sounds awesome now!

Any plots showing what the induction kit by itself does?

Got some independant tests as well?

[payney8]

subscribed!

[castros]

I think 2.5 is more than enough, in my opinion. I've always used single 2.25 in all of my cars.