Doesn't fire the ignition for the first X events during cranking.
Announcement
Collapse
No announcement yet.
Turbo woes
Collapse
X
-
IG @turbovarg
'91 318is, M20 turbo
[CoTM: 4-18]
'94 525iT slicktop, M50B30 + S362SX-E, 600WHP DD or bust - updated 3-17
-
Hey I figured I'd chime in here. i'm having the same issue here at 5k rpm. I've done some searching and basically its my understanding that the CPS generates a voltage that drops whenever the two missing teeth pass. As the RPM's climb the overall voltage level is lower because they are moving faster but the drop is relativly the same. Megasquirt has had issues with noise in the CPS signals generated by 60-2 wheels that we have in our e30's. the regular MS 3.57 has adjustable resisters to set a min and max for the signal and you have to play around with them. Microsquirt however does not have that adjustment. you must add a resister to the board and they have included a place for one. Now we are working with a custom built set up and I'm willing to bet Keith has already installed a resister in our units. (other people have had this issue at 1500-2k rpms with no resister.) however, if the resister value is too large the max voltage at higher rpms might not ever be high enough to register. Changing to a weaker resister might put the CPS signal right in the sweet spot. I'm Just hesitating to change anything till I hear from Keith first. read this: http://forums.turbobricks.com/showthread.php?t=306770 guy having the same issue and he resolved it with a different resister.
https://www.diyautotune.com/support/...megasquirt-vr/ this shows you why the issue is happening but not how to fix it in microsquirt.
Hope this helps. if i get mine up and running ill update you.
Comment
-
Originally posted by kyleconstantine View PostYoure right i said it backwords. I just reread the link i posted. Thanks
Sent from my SAMSUNG-SM-G891A using Tapatalk
Comment
-
Whodwho's always been slow to respond but he has always got back to me. hes got a lot of guys hitting him up everyday and im pretty sure he has a full time job outside of this.
I'm not 100% sure my sensor is genuine bmw, it's been in the car for a while. I had purchased a brand new one that was maybe hella but that one has this issue at 4k rpms instead of 5k so I switched back. they seem to have a lot of variance in the signal strength which is why different resisters are needed. So I'm thinking ill need a larger resister to cut the signal down at higher rpms contrary to what i said before?
I don't have an oscilloscope but looking at my tooth logger it looks like the teeth are all showing up they just all get shorter which is why I had originally thought I needed a smaller resister.
edit: if you google around there is a thread exactly like this on e30tech thats down...same questions with one of whodwhos units and it probably has the solution in it already but the page is down...
Comment
-
Originally posted by kev kev View Poststupid question how do i post a video of my logLast edited by kyleconstantine; 11-18-2016, 04:35 PM.
Comment
-
Ok my issue is resolved. Sorry for cluttering this thread up with a lot of unnessesary info. It was way easier than i was making it. Check your cps gap between the cps and the toothed wheel. Its supposed to be 1mm +- .3mm. Mine was almost 2mm. I loosened the 2 13mm bolts and it didnt seem to have any adjustment so i used a prybar gently and got it to like .7mm. Instantly my car could rev all the way to 7 grand.
Comment
-
Well it is cast aluminum, highly unlikely you'll be able to bend it without breaking it in any case. I'd like to know how they got knocked out of spec in the first place. I know a guy who I caught a while back bending his adjustable cast aluminum brake lever by heating and bending it. He had lowsided the bike and ridden it home with a wonky lever so he wanted to "fix" it. I did him a favor and mid-explanation snapped it off in front of him with surprisingly little effort, as a way of telling him he should put the stock one back on until he could replace the adjustable. That's a good way to kill yourself, bending your cast aluminum brake lever twice then riding with it.Last edited by varg; 11-19-2016, 12:16 PM.
IG @turbovarg
'91 318is, M20 turbo
[CoTM: 4-18]
'94 525iT slicktop, M50B30 + S362SX-E, 600WHP DD or bust - updated 3-17
Comment
Comment