The SSSquidBoard is a great piece of hardware for those of you looking to run two separate tunes in your Motronic 1.1 or 1.3 ECU for situations like track days, smog testing, valet/shop security, fuel economy, octane switching, etc! What it does is allows you to install two chips within one single ECU and choose between which one you want to run.
Install a performance tune in one slot for track days with higher octane, and the stock chip in the other slot for lower octane and daily driving; or get a valet mode tune in one slot to limit RPM and speed, and your race car tune in the other because race car. Quickly switch to a stock tune when putting your car through smog testing and never have to worry about anything looking out of place, then switch easily back to your performance tune as soon as you leave the shop with a crisp new “PASSED” sticker on your windshield. Never have to worry about a gas station having the correct octane on a road trip by easily switching back and forth between tunes with the flick of a switch. Heading to the dyno and need to compare two different setups? Not a problem!
Simply run the cable from your ECU to any mounting position of your choice, and hide the switch easily in your cabin with the included incognito black waterproof molded cover.
Unlike other products, you aren't limited to just my tunes, you can put whatever you want in there! Have a Conforti or Dinan or whatever other brand you want to use instead of anything from me? It doesn't discriminate!
for many Motronic 1.3 ECUs (M1.3 DME) including, but not limited to the following ECU models.
153
173
380
381
524
525
526
While this daughterboard may fit into other ECUs, it has only been tested on the above models.
All r3v members get an extra 20% discount on the SSSquidBoard until the end of March 2017! Use coupon code "SSSB20"!
PURCHASE AT THE LINK BELOW
Install a performance tune in one slot for track days with higher octane, and the stock chip in the other slot for lower octane and daily driving; or get a valet mode tune in one slot to limit RPM and speed, and your race car tune in the other because race car. Quickly switch to a stock tune when putting your car through smog testing and never have to worry about anything looking out of place, then switch easily back to your performance tune as soon as you leave the shop with a crisp new “PASSED” sticker on your windshield. Never have to worry about a gas station having the correct octane on a road trip by easily switching back and forth between tunes with the flick of a switch. Heading to the dyno and need to compare two different setups? Not a problem!
Simply run the cable from your ECU to any mounting position of your choice, and hide the switch easily in your cabin with the included incognito black waterproof molded cover.
Unlike other products, you aren't limited to just my tunes, you can put whatever you want in there! Have a Conforti or Dinan or whatever other brand you want to use instead of anything from me? It doesn't discriminate!
for many Motronic 1.3 ECUs (M1.3 DME) including, but not limited to the following ECU models.
153
173
380
381
524
525
526
While this daughterboard may fit into other ECUs, it has only been tested on the above models.
All r3v members get an extra 20% discount on the SSSquidBoard until the end of March 2017! Use coupon code "SSSB20"!
PURCHASE AT THE LINK BELOW
(thanks for pointing that out)
Comment