Announcement
Collapse
No announcement yet.
Slightly Overbuilt E30 2014
Collapse
X
-
That pedal assembly is really nice, I may be looking for one in the near future. What do they run? like total?
-
Got a little time last night to final install the adapter and bellhousing. Hopefully a little time later to install the trans for good and make a mount for it. Received my flange for the diff side so I can make sure driveshaft length i measured it good. Wiring is coming together nicely. No big hurdles left now, just a bunch of small ones..
Leave a comment:
-
Input shaft is in! Looks like it will work.
Also finished coating the shifter. Just need to trim a few more small spots on the tunnel to clear the levers. Driveshaft on its way soon. Then hopefully I won't have to work too many more saturday/sundays so i can get a chance to put this thing the rest of of the way together
Leave a comment:
-
Finally got some time to work on this thing. I forgot there was actually paint under all the dust, so washing it was a nice surprise. Finished clearancing the car to make the trans fit. Still waiting on the input shaft. Now that its in place I can order the driveshaft.
The shifter sits in the same location as the stock one but looks way better. I still need to powdercoat the bracket for the shifter and the rods. Also need one more lever for one of the shift towers.
Leave a comment:
-
The e46 diff is almost a direct swap, just need to rebuild subframe, make gussets and weld it out.
Leave a comment:
-
Leave a comment:
-
Funny you should ask... The guy i got it from said it was .5 seconds faster than his powerglide set up running in the 6.xx range.
Leave a comment:
Leave a comment: