Removing my Turbo, Need some advice

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mowglee
    Noobie
    • Jan 2014
    • 8

    #1

    Removing my Turbo, Need some advice

    Im going to be removing the turbo that came with my car, is there a quick write up on how to remove it or anything i need to know. i need to remove it because no one will work on the car with the turbo. I want to go stock M20.

    Thanks
  • mrcheezle19
    E30 Fanatic
    • Apr 2012
    • 1451

    #2
    What does your car need done? Many shops here on the forum have no issues with turbos. You could look into Castro Motorsport if you need work done.
    Last edited by mrcheezle19; 04-16-2015, 06:52 PM.


    Originally posted by blunttech
    Dude this is r3v. 20 bucks gets you a used timing belt or a low mileage head gasket

    Comment

    • mowglee
      Noobie
      • Jan 2014
      • 8

      #3
      It chokes out when i start to accelerate and eventually will die out. It wont start anymore, a mechanic suggested that the engine might need to be rebuilt, i took it to JMP but they told me in order to check the engine i would need to remove the turbo, which is something i want to do.

      Comment

      • Dj Buttchug
        R3V OG
        • Jun 2010
        • 7635

        #4
        what are you doing owning a turbo m20 without knowing how to work on it

        Turbo M42 Build Thread :Here
        Ig:ryno_pzk
        I like the tuna here.
        Originally posted by lambo
        Buttchug. The official poster child of r3v.

        Comment

        • ak-
          R3V OG
          • May 2009
          • 12422

          #5
          You want to remove the turbo temporarily or the whole system? Who's car did you buy?

          1991 325iS turbo

          Comment

          • mowglee
            Noobie
            • Jan 2014
            • 8

            #6
            I want to remove from the entire system. I don't think he's on the forum. I bought from some guy out in Santa Ana.


            Sent from my iPhone using Tapatalk

            Comment

            • IronFreak
              No R3VLimiter
              • Dec 2012
              • 3702

              #7
              Have you heard the expression, "You're about to open a can of worms......"
              sigpic

              Rebellion Forge Custom Fabrication

              1988 325is - TrackRat in progress

              Instagram @rebellionforge

              Comment

              • mowglee
                Noobie
                • Jan 2014
                • 8

                #8
                Never heard it.


                Sent from my iPhone using Tapatalk

                Comment

                • BMWManiac
                  E30 Enthusiast
                  • Dec 2010
                  • 1091

                  #9
                  Originally posted by mowglee
                  Never heard it.
                  How old are you? Anyways, removing the turbo is a pretty involved process and without seeing the car in front of me, and not knowing your automotive knowledge, you may want it towed to a shop that can work on these cars with turbos....it isn't rocket science, but some shops have that policy
                  1997 Artic Silver M3
                  CES GT4094r 651hp/615tq @ 24 psi

                  Comment

                  • whodwho
                    E30 Mastermind
                    • Jun 2008
                    • 1547

                    #10
                    Find someone that wants to go boosted and trade for the labor and stock parts to put it all back stock.
                    My M20 Frankenbuild(s)
                    4 Sale - Fully Built TurnKey Megasquirt Plug and Play EMS

                    Comment

                    • BobombETA
                      E30 Mastermind
                      • Apr 2008
                      • 1575

                      #11
                      Originally posted by mowglee
                      It chokes out when i start to accelerate and eventually will die out. It wont start anymore, a mechanic suggested that the engine might need to be rebuilt, i took it to JMP but they told me in order to check the engine i would need to remove the turbo, which is something i want to do.

                      Removing the turbo won't necessarily fix this, and neither would rebuilding the engine.

                      No start could be any number of things. But an engine needs 3 things to run: fuel, spark, and air. Troubleshooting is a matter of narrowing down the 3.

                      I'll throw out a simple suggestion, check your fuel pump relay.

                      Instagram
                      sigpic
                      Current: 99 M3
                      Past: 84 325e, 84 528e

                      Comment

                      • McGyver
                        R3V Elite
                        • Jun 2009
                        • 4471

                        #12
                        Originally posted by whodwho
                        Find someone that wants to go boosted and trade for the labor and stock parts to put it all back stock.
                        best idea so far.

                        OP: Removing turbo is almost as complicated as going turbo. You're going to need to remove the turbo, intercooler, piping, exhaust, ecu, wiring, then put it all back together using the factory airbox, wiring, ecu, and exhaust.

                        It's going to get real expensive real quick. You should probably either get the car towed to a shop that will work on it, or sell it as-is.
                        sigpic
                        1987 - 325i Convertible Delphin Auto [SOLD], 325i Convertible Delphin Manual [SOLD]
                        1989 - 325i Convertible Bronzit m30b35 swapped [SCRAPPED], 325i Sedan Alpine Auto[DD]
                        1991 - 325i Coupe Laguna Manual [Project], 535i Sedan Alpine [SCRAPPED]

                        Comment

                        • Steven
                          Forum Sponsor
                          • Dec 2012
                          • 2305

                          #13
                          I'll take off your turbo and all the components in trade for my labor and putting all the stock stuff back on the engine. PM me if you're interested.

                          Feedback!
                          Custom Cup Holder Consoles!
                          Calypso Story--S50/Shaved and Tucked Bay

                          Comment

                          • mr2peak
                            R3VLimited
                            • Aug 2008
                            • 2388

                            #14
                            Originally posted by Steven
                            I'll take off your turbo and all the components in trade for my labor and putting all the stock stuff back on the engine. PM me if you're interested.
                            That's actually a really good offer. Paying a shop to do it would be over a grand easy.
                            Drive it hard. Maintain it well.


                            Convertible Technical & Discussion
                            A Topless Memorandum

                            Comment

                            • Hooffenstein HD
                              Banned
                              • Nov 2012
                              • 1388

                              #15
                              Why not leave it turbo and find a competent shop?

                              Not that I'd ever take my car to a shop but if one told me I had to revert my car to stock before they'd look at it, I'd laugh and walk away.

                              Comment

                              Working...